Secondhand Nellcor Bedside Console Type Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 13.10.2025

Covidien Nellcor Bedside SpO2 Patient Monitor Analysis Report

Product Description and Content

The product shown in the images is a Nellcor series bedside SpO2 monitor from the Covidien brand. This device is designed to continuously monitor patients’ blood oxygen saturation (SpO2) and pulse rate. The product set consists of the main monitoring unit, one power cable, and one SpO2 finger sensor. Its compact structure makes it suitable for bedside use or easy portability with its built-in handle.

• Main Unit: 1 unit
• Power Cable: 1 unit
• SpO2 Sensor: 1 unit

Brand and Model Identification

The Covidien brand and Nellcor series are clearly visible on the front panel of the device. The quick start guide label on the top part states “Nellcor™ Bedside SpO2 Patient Monitoring System”. This information confirms that the product is a Nellcor Bedside SpO2 Monitor manufactured by Covidien.

General Condition and Cosmetic Assessment

Despite being used, the device appears to be in generally good and clean condition. Its physical state suggests that it has been regularly maintained. No documents or invoices are visible in the images.

• Casing: No cracks, breaks, or significant discoloration have been observed on the device’s white and dark blue plastic casing. There are no major scratches or deformations on its surface.
• Screen: The device’s screen is off. No scratches or cracks are visible on the screen surface.
• Mechanical Components: The rotary knob, power, alarm, and menu buttons located on the front panel are physically intact and undamaged.

Technical and Hardware Analysis

Upon visual inspection of the device’s hardware components and accessories, no functional impediments were found.

• Accessories: Included with the device are one gray power cable and one gray SpO2 sensor cable. The connectors and outer insulation of both cables appear intact.
• Ports and Connections: The front of the device features an input for the SpO2 sensor and a USB port.
• Battery Status: A “Battery Charge” indicator light is present on the front panel. This indicates that the device has an internal battery. However, there is no visual evidence regarding the current health status of the battery. The device can operate for up to 5 hours with a lithium-ion battery.

Label Information

Limited information can be read from the labels on the device. Specifically, the label on the top part contains quick use information.

• Reference Code: The code A7215-1 REV 03/2012 is readable on the top label. This code may indicate the revision date of the label or software.
• Detailed information such as serial numbers or lot numbers on other labels cannot be clearly read from the images.

Potential Failure Risks

Based on the inspection conducted via the images, no obvious potential failure risks have been identified on the device. The device’s casing is intact, no critical damage such as crushing or fraying is observed on its cables, and its general condition is positive. This indicates that the device is well-maintained and the risk of a hardware failure is low.