Secondhand Nellcor Bedside Console Type Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 13.10.2025

Covidien Nellcor SpO2 Monitor Analysis Report

Overview and Product Description

The images show a medical bedside monitor. The “COVIDIEN” brand logo, “Nellcor” text, and “SpO2” indication on the device suggest that it is a pulse oximeter used to measure blood oxygen saturation. The overall craftsmanship, material quality, and clarity of the brand logos on the device indicate that the product is original. This monitor is used for patient monitoring in environments such as clinics or home care.

Package Contents and Quantity Information

A total of 3 items are present in the image. These items are listed below:

• 1 Covidien Nellcor bedside monitor
• 1 power cable
• 1 serial/data cable (with blue connectors)

Physical Condition Assessment

The device is generally in used condition. Findings regarding its physical condition are as follows:

• Casing: The product’s blue upper casing has noticeable scratches and residue resembling adhesive, especially in the middle section. No significant deformation or discoloration is observed on the device’s white plastic parts.
• General Cleanliness: While there is no prominent dirt or dust on the product overall, standard wear and tear due to use is present. No cracks, breaks, or dents have been detected.

Mechanical and Electronic Components

The visual analysis of the device’s mechanical and electronic components is as follows:

• Mechanical Parts: The white rotary control knob and other buttons on the front panel appear physically sound. There is no damage to the integrated handle structure that allows the device to be carried. The ventilation grilles on the side are also clean and unbroken.
• Electronic Parts: The device’s screen is off and shows no scratches or cracks. The power and sensor input sockets are in good physical condition, with no signs of bending or breakage.

Accessory Analysis and Missing Parts

Upon examining the accessories in the images, a power cable and a data cable are seen accompanying the device. The plug and socket parts of the power cable are sound. The other cable appears to be a data cable with blue connectors at both ends. However, the SpO2 sensor probe (finger probe), which is essential for the device to perform its primary function, is not present in the images. This is a significant omission, meaning the device cannot perform measurements in its current state.

Technical Label Information

On the side of the device, there is a white manufacturer’s label containing various information and barcodes. However, due to the image resolution and the small size of the text on the label, specific information such as Serial Number, REF Code, or Lot Number cannot be clearly read.

Potential Risks and Conclusion

The scratches on the device’s casing are entirely cosmetic and do not pose a risk of functional failure. No serious damage, rusting, or cable crushing, which could indicate a potential malfunction, has been detected. The most significant missing component of the product is the SpO2 sensor, which provides the basic measurement function. The device, in its current state, is an incomplete set, and a compatible sensor must be obtained for it to be usable.