Defective Secondhand Nellcor N-560 062383 Console Type Pulse Oximeter Sensor Board

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 17.11.2025

Nellcor Electronic Board and Cable Assembly Analysis Report

Device Identification and Area of Use

The product in the visuals consists of a circuit board containing various electronic components and a cable assembly integrated into this board. The brand and structure of the product indicate that it is an internal part or interface board used within a medical device. Rather than being a standalone device, the board is a functional component of a larger system.

Brand and Model

The manufacturer’s brand name Nellcor is clearly visible on the bottom surface of the electronic board. On the top surface of the board, the phrase FAB ODYSSEY REV D TOP is present, indicating the board’s model or revision. Additionally, brands belonging to component manufacturers are also found on the board; for example, a Xilinx logo is present on one of the large integrated circuits.

Quantity and Contents

In total, one electronic circuit board and its attached cable assembly are present in the visuals. The cable assembly terminates with three separate connection points: one D-Sub connector and two plastic sockets of different structures.

General Condition and Originality

The product is considered used as it is unpackaged and does not contain any protective film. Nevertheless, its general physical condition is quite good. The brand markings, labels, and soldering workmanship on it have a professional appearance, suggesting that the product is an original Nellcor component. There are no signs of burns, stains, or liquid contact on the board.

Physical Deformation Examination

During the detailed examination, no significant physical deformation such as cracks, dents, bends, or discoloration was detected anywhere on the board or its mounted components. No breaks or wear were observed in the plastic parts of the cables and connectors either. Overall, it has a clean and well-maintained appearance.

Mechanical and Electronic Components

All electronic components on the board (chips, resistors, capacitors, etc.) appear to be in place and intact. No breaks or signs of cold solder joints are observed in the solder connections. The connectors and sockets attached to the cable assembly are mechanically sound, with no bent pins or damage.

Label and Code Information

The legible label information found on the product is listed below. These codes are important for identifying and tracking the part.

• PCB Top Surface Marking: FAB ODYSSEY REV D TOP
• PCB Bottom Surface Brand Marking: NELLCOR
• PCB Bottom Surface Code Information: Made in CHINA FZ004-10 94V-0
• Serial Number (Estimated): The code S41238A2332 on the barcoded label on the bottom surface may be the product’s serial number.
• Label on Chip (U24): 069217, U24, A80071P V01
• White Label (Top Surface): 069226
• Green Label (Top Surface): ICT 27

Potential Failure Risk Assessment

Based on the evaluation from the visuals, no obvious conditions posing a failure risk were found on the product. There is no evidence indicating potential issues such as crushed cables, damaged connectors, or burnt electronic components. The physical condition of the component is quite good for a used part and exhibits a reliable operational potential.