Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 20.11.2025
Bedhead Unit and Oxygen System Analysis Report
Product Description and Device Identification
The product examined in the visuals is a Bedhead Unit, used in hospital rooms or healthcare facilities, mounted on the wall at the head of a patient’s bed. The device is a multi-functional system that combines medical gas access, electrical connection points, and lighting functions on a single aluminum body. Although the product is positioned vertically in some of the photos for visual presentation purposes, its horizontal orientation in the last visual reflects the actual mounting position. The system includes an integrated oxygen therapy set.
Brand and Model Analysis
As a result of a detailed visual inspection, the brand SENA was clearly identified on the medical gas outlet, which is the most critical component of the unit. This information was confirmed by the writings on the white plastic ring around the gas outlet.
- Oxygen Outlet Brand: SENA
- Registration/Certification Information: The European Union conformity mark “CE” logo and the code “1984” (Kiwa Meyer Belgelendirme Hizmetleri A.Ş.) representing the certifying body are clearly visible on the outlet.
Since there is no label or print for the manufacturer of the aluminum body, there is no visual evidence regarding the brand of the main casing. However, the gas equipment is SENA branded.
Physical Structure and Material Quality
The product consists of a white main body with a burgundy (dark red) decorative and functional strip running through the middle. The outer casing is made of extruded aluminum profile, giving it a robust and rigid appearance. Transparent/frosted, striped (fluted) plastic diffusers are located on the upper and lower (or side) parts of the unit; these sections are designed to diffuse light from the internal lighting system (reading lamp or room lighting).
General Condition and Status
The general condition of the device has been evaluated as “New” or “Very Clean Second Hand”. The burgundy-colored central panel has a glossy finish, and no scratches, cracks, or discoloration have been observed on it. There is no yellowing or impact marks on the aluminum and plastic components. The product appears cosmetically flawless.
Technical Components and Accessories
The following technical components and accessories have been identified on the device. The total number of parts consists of the main unit and 1 complete oxygen system mounted on it.
Medical Gas Components
The mechanical components connected to the oxygen line are as follows:
- Oxygen Outlet: SENA branded, with “OKSİJEN” (OXYGEN) inscription, yellow color-coded labeling, and a valve system including open/close (OPEN – Arrow Direction) instructions.
- Flowmeter: A vertical tube that adjusts and displays the oxygen flow rate. Scaling is from 1 to 10 (presumably L/min). The tube glass is transparent and clean, with a measurement ball inside.
- Humidifier Bottle: A transparent container connected to the flowmeter’s outlet, which humidifies the oxygen delivered to the patient. The bottle has “Max” and “Min” level lines. The metal rod inside the bottle is clean, and no calcification is observed.
Electrical and Electronic Components
The electrical modules integrated into the burgundy strip of the unit are as follows:
- Sockets: A total of 3 grounded sockets are present. Two of these have standard white covers, and the bottom one has a red cover. The red socket is typically used in hospitals for devices connected to the UPS (Uninterruptible Power Supply) line.
- Switch: At the very top, there is 1 wide white electrical switch. This switch is likely for controlling the lighting system on the unit.
- Cabling: A white electrical power supply cable exiting from the back/bottom of the unit is visible in the visual. The cable insulation is intact.
Label and Mark Analysis
The following data has been read from the labels on the product:
- SENA: Brand name on the oxygen outlet flange.
- OKSİJEN: Turkish phrase indicating the gas type.
- OPEN: English phrase and arrow indicating the valve opening direction.
- CE 1984: Mark indicating the product’s compliance with medical device regulations.
- BİOTEST KALİBRASYON…: A green service/calibration label affixed to the flowmeter body. This label indicates that the device has previously undergone professional testing. However, the date on the label cannot be read due to visual resolution.
- Max / Min: Liquid level warnings on the humidifier bottle.
Areas of Use and Purpose
This product is designed for use in patient wards, intensive care units of hospitals, or in the rooms of patients receiving home care services. Its primary purpose is to safely provide oxygen support to the patient, offer electrical power for bedside medical devices (monitor, infusion pump, etc.), and illuminate the area around the bed.
Fault and Risk Assessment
No signs of breakage, dents, rust, or mechanical failure have been detected in the product in the visuals. The oxygen humidifier bottle is intact, no cracks are visible. The electrical socket outlets are clean, with no burn marks. No potential fault risk (e.g., cable fraying, oxidation) was observed during the visual inspection. The device is in a condition ready for installation and use.
