Secondhand BEGO Gelovit 200 Duplicating Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 30.09.2025

Bego Gelovit Duplication Device Analysis Report

Overview and Product Description

The product shown in the images is a duplication material preparation device used in dental laboratories. The device is designed to melt special gels and make them ready for use. The product has a vertical design with a control panel on the front, an arm and nozzle at the bottom for material flow, and a cooling fan on the side. A yellow lid belonging to the material reservoir is located on the top part.

Brand and Model Information

The Bego brand and Gelovit model name are clearly visible on the front panel of the device. This information definitively identifies the product.

Physical Condition and Deformation Assessment

The device is generally in good condition and is a used product. Its physical condition can be summarized as follows:

• Casing: No significant cracks, breaks, or dents are observed on the white front casing of the device. There might be slight dirt or discoloration on the surface due to use, but it generally appears clean. The black side and rear casing of the device are also structurally sound.
• Fan and Ventilation: A noticeable amount of dust accumulation is present on the grille of the cooling fan located on the side of the device. This indicates that the device has been in use for a long time and may require cleaning or maintenance.
• Lid and Other Parts: The yellow lid on the top and the black dispenser arm on the front appear to be intact and undamaged.

Mechanical and Electronic Components

The mechanical and electronic components of the device have been assessed through the images as follows:

• Control Panel: The front panel features a digital display and control buttons. Since the screen is off, no error messages or operating status information can be observed. The buttons are physically in place and show no signs of excessive wear.
• Power Connection: There is a power switch and a standard power cable input at the back of the device. In the images, the power cable is connected to the device.

Accessories and Equipment

In addition to the device itself, only one power cable connected to the device is visible in the images. No box, user manual, or other additional accessories are present.

Label and Technical Information

There is a label on the back of the device; however, the resolution of the images is not sufficient to read the serial number, REF code, manufacturing year, or other technical information on this label. Therefore, no information about the label content can be reported.

Potential Risk Assessment

Based on visual inspections, no immediate signs of malfunction have been detected on the device. The casing integrity and the physical condition of the parts are generally good. The only point of concern is the dust accumulation on the fan located on the side panel. This condition could lead to insufficient cooling, potentially affecting the device’s performance or causing overheating issues in the long term. The overall condition of the device suggests that its lifespan could be extended with regular maintenance and cleaning. No obvious breaks, cracks, or burn marks, which would indicate serious potential malfunction risks, have been observed.