Secondhand Leica Reichert-Jung Rotary Microtome

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 07.09.2025

Reichert-Jung Histocut Microtome Device Analysis Report

Overview and Device Identification

The visuals show a mechanical device used in a laboratory environment to take very thin sections from tissues or materials for microscopic examination. This device has been identified as a microtome. The analyzed product consists of a single main body, and no additional accessories are present in the visuals.

The total number of products in the visuals is 1 (one). The product’s operation is carried out manually via the hand-rotated mechanical levers and adjustment knobs on it.

Brand and Model

The brand name Reichert-Jung is clearly visible on the front surface of the device, and the model name Histocut is clearly readable on its base. Based on this information, the brand and model of the product have been definitively identified. The number “800” is also seen on the side of the device, which may indicate the model series.

Condition and State Assessment

The general condition of the device has been assessed as used. Its white main body shows signs of wear and tear due to use, such as light dirt and superficial scratches. The black lower base part has small paint chips and slight abrasions on its edges. However, no major cracks, breakages, or serious damage that would hinder the device’s functionality have been observed in the visuals.

Mechanical and Physical Component Examination

Upon visual examination of the product’s mechanical components, they appear to be in an intact state.

• Control Levers: The large blue turning lever on the side of the device and the black adjustment knobs on the front surface appear physically sound.
• Sample Holder: The sample clamping and sectioning mechanism located in the center of the device is in place and does not contain any visibly missing or broken parts.
• General Structure: No significant rust, bending, or deformation has been detected in the device’s casing or mechanical parts.

Label Information

On the front surface of the device, above the brand name, there is an affixed label. The information on this label is listed below:

• Code/Number: 31801
• The label also features “Labx.com” and a barcode. This suggests that the device was previously labeled for inventory tracking.

No other labels or writings containing information such as serial number, REF code, or manufacturing year have been found in the visuals, apart from this label.

Potential Risk Assessment

Based on visual inspections, no critical issue that could lead to immediate failure has been observed in the device. The signs of wear and tear on the product are at a level that can be considered normal for laboratory equipment. The mechanical components being in place and sound indicates that the device can perform its function in its current condition. The overall physical integrity of the device is in good condition.