Secondhand Medrad Imaxeon Salient CT Injector

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 26.02.2026

Sino Medical SINOPower-D CT Contrast Injector Analysis Report

Device Identification

The device in the image is a dual-head automatic contrast medium injector system used in Computed Tomography (CT) scans. The system consists of three main components: the injector head, a mobile vertical stand, and an external control console.

Brand and Model

Brand: Sino Medical (Logo and typography analysis on the device)

Model: SINOPower-D (Clearly readable on the top panel of the injector head and the upper right corner of the screen)

Applications

It is used in radiology departments and imaging centers to inject contrast medium and physiological saline into veins during Computed Tomography (CT) examinations. Its dual-head structure allows for sequential or simultaneous injection of both contrast and “flush” (wash) procedures.

Item Count

• 1 Injector Head Unit (Mounted on the stand)
• 1 Touchscreen Remote Control Console
• 1 Mobile Stand (Wrapped in protective packaging)
• 2 Syringe Holders (Attached to the device)
• 1 Communication Cable (Coiled)

General Condition

The main body of the device (stand portion) is completely wrapped in clear protective nylon packaging, indicating that the device is in a storage or shipment phase, or is protected when not in use. The injector head and console are uncovered and operational (screens are active). Cosmetically, it is clean and in good condition.

Authenticity

The logos on the device, material quality, screen interface graphics, and industrial design details confirm that the product is an original Sino Medical production.

Physical Deformations

There are no visible cracks, breaks, dents, or discoloration on the outer casing, screen, or piston mechanisms of the injector head. The control console casing is intact. No crushing or deformation was observed on the cables. Although the lower details cannot be seen as the stand portion is packaged, its vertical stance is straight.

Mechanical Components

The injector head has two piston slots, labeled A and B. The alignment of the pistons is proper. The locking mechanisms of the syringe holders appear sturdy. The angle of the injector head on the stand suggests that the movement mechanism (tilt) is functional. The piston pusher arms are aligned within the syringe.

Electronic Components and Screen Analysis

Both the main unit (head portion) and the external console are powered on. The touchscreen LCD screens on both units are active, and their brightness is uniform. No dead pixels or screen cracks have been detected.

Screen Data:

• The blue-background user interface is active.
• Values 137 and 200 are readable on the graphical bars (Likely pressure limit or injection rate parameters).
• Injection status simulation or “ready” mode is displayed.
• In addition to the touch panels, the lights or markings on the physical buttons are clear.

Accessories and Compatibility

• Syringes: Two transparent chambers (syringes) are attached to the device on sides A and B. Extension lines are present at the tip of the syringes.
• Cables: A long, thick, and protected grey data cable is neatly coiled and placed next to the console. This cable likely provides the connection between the control room and the injector room.

Potential Failure Risk

No physical damage, liquid contact, rust, or exposed electronic circuits are visible in the images. Its packaged state indicates that the device is well protected. Based on the visual data, no significant failure risk is anticipated.

Existing Fault

No error messages or “Error” indications are visible on the device screens. The system is operational in standby or setup mode. No mechanical blockages or broken parts have been visually detected.