Secondhand Sesan KY-002 Adult Folding Toilet Riser

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 20.12.2025

Bayteks Commode Chair Analysis Report

Device Identification

The examined product is a fixed-leg commode chair designed to facilitate the toilet needs of individuals with limited mobility. Also referred to as “Komot” in medical terminology, this product is manufactured to be used by positioning it over a toilet bowl thanks to the opening in the middle of the seating section, or by placing a suitable receptacle underneath it.

Brand and Model Information

Upon detailed examination of the black plastic backrest visible in the images, the inscription Bayteks and the brand’s “b” logo, pressed into the material during molding, are clearly legible. The product is branded Bayteks. As there is no specific label or writing indicating the model name in the images, the model name has not been specified.

Originality Status

The fact that the branding on the backrest panel was done during the plastic molding phase (emboss) rather than being subsequently glued, indicates that the backrest part of the product was manufactured by Bayteks and is original. The workmanship and material structure are consistent with standard medical product quality.

Areas of Use and Purpose

This product is designed for the elderly, disabled individuals, or patients experiencing mobility difficulties after surgery. Its primary areas of use are as follows:

• It can be placed over an existing toilet bowl to be used as a raised support.
• For bedside use (by adding a commode bucket underneath), it allows the patient to relieve themselves without needing to go to the toilet.
• Thanks to its wide seating area and armrests, it helps the patient get support while sitting down and standing up.

Quantity Information

The images show 1 unit of a commode chair. No other parts or assembly equipment are visible in the images.

General Condition and State

The product is in a used condition. Its second-hand state is evident from the paint deformations on the metal parts and the general appearance of the seat cushion. However, the frame integrity appears to be preserved, and it is structured to perform its main function.

Physical Deformation and Wear Analysis

The physical conditions identified during detailed visual inspection are as follows:

• Metal Parts: The burgundy-colored metal chassis, especially on the leg sections and tube connection points, shows paint chipping, scratches, and scuff marks.
• Seating Section: The black leather/vinyl covered cushion shows wrinkles and looseness due to use. Although there is an impression of a slight depression in the internal padding of the cushion, no tears or holes were detected visually.
• Plastic Backrest: The plastic backrest appears robust, with no cracks or breaks.

Mechanical Components Examination

The product has fixed legs (it is not wheeled). The 4 black rubber/plastic feet on the leg ends are in place. These feet are important for preventing slipping and protecting the floor. The weld points and screw connections of the frame appear visually stable.

Electronic Components

This product is entirely mechanical and intended for manual use. It does not contain any electronic components, batteries, or digital displays.

Accessories and Missing Parts Check

During the product analysis, the accessory status was determined as follows:

• Missing Part (Bucket/Potty): Commode chairs normally have a rail-mounted or suspended potty bucket (basin) under the seating section. This plastic bucket is not present in the images. The product is seen only as a frame and seat cushion.
• Backrest and Seat: These are mounted to the frame; there are no missing parts.

Dimensions and Compatibility

The product in the image is sized for standard adult use. The opening in the seating area has a geometry suitable for standard toilet bowl forms.

Manufacturing Year and Label Information

There is no paper or foil-based label visible on the product indicating the manufacturing year, serial number, or technical lot numbers. Therefore, definitive data regarding the manufacturing year cannot be provided.

Current Fault Status

No critical fault (such as “broken, cracked, detached part”) that would directly prevent use has been visually detected in the product. Only a missing accessory (bucket) and cosmetic wear are present.

Potential Fault Risk

The paint chipping on the metal parts of the device may lead to rusting (corrosion) over time if it remains in humid environments (such as bathrooms) for extended periods. The metal profile may need protection against corrosion. Apart from this, it exhibits a mechanically stable structure.