Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 19.11.2025
Pointoselect plus Device Analysis Report
Overview and Product Description
The images show a Pointoselect plus model device and its accessories. This set consists of a main control unit, a pen-shaped probe, and a cylindrical metal hand electrode. The general structure of the device, the pen probe, and the hand electrode indicate that this product is used in fields such as acupuncture or auriculotherapy (ear acupuncture) for precise detection of specific points on the body. The metal rod is likely used as a grounding or reference electrode to complete the circuit during measurement.
The breakdown of the products in the image is as follows:
- 1 unit of Pointoselect plus main unit
- 1 unit of Pointoselect plus pen probe
- 1 unit of metal hand electrode
Physical Condition and Deformation Analysis
The overall condition of the product, when evaluated through the images, is very good and clean. It gives the impression that the device is lightly used or well-maintained. There are no noticeable scratches, cracks, or impact marks on the main unit’s white plastic casing. However, a slight yellowing is observed on the plastic surface of the pen-shaped probe compared to the main unit. This condition is typically seen in plastic materials exposed to sunlight or environmental conditions over time and is a cosmetic issue that does not affect the product’s functionality. No deformation was observed on the metal hand electrode, which has a shiny and smooth surface.
Mechanical and Electronic Component Evaluation
The mechanical parts and connection points of the device appear to be in good order. The metal test tip of the pen probe is straight and shows no signs of bending. The insulation of the red, grey, and black cables connected to the device is intact; no damage such as crushing, peeling, or breakage is observed on them. The metal connector and other cable connection points located on the top of the main unit are physically complete and undamaged.
Electronically, the active LED lights on the main unit’s screen indicate that the device is operational or at least receiving power. The indicator lights marked with “G” (Gold) and “S” (Silver) located near the tip of the pen probe are off in the image; these lights likely activate during point detection.
Detailed Examination and Features
Screen Analysis: On the front panel of the device, there is a numbered LED bar graph indicator from 1 to 16, positioned under the German heading “Empfindlichkeit” (Sensitivity). In the image, the lights on this graph are shown to be active up to level 4. This indicator may represent the device’s current sensitivity setting or the value of a measurement taken.
Label Information: No informational label containing a serial number, lot number, reference code (REF), manufacturing date, or other technical specifications could be identified on the product in the images.
Potential Malfunction Risk: During the examination conducted through the available images, no critical risk factor such as rust, severe cable crushing, or casing breakage that could endanger the device’s functionality was found. The slight color change on the probe is purely a cosmetic detail and does not pose a malfunction risk. The device’s overall physical condition is very good, and no impediment to its use is apparent.
