Secondhand Ice Max Laser Epilation Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 28.07.2025

IPL Laser Hair Removal Device Analysis Report

Overview and Device Description

The images show an IPL (Intense Pulsed Light) device and its attached handpiece, which is understood to be used for aesthetic and cosmetic purposes. No prominent brand or model information was found on the device’s casing. However, the inscriptions “DPL” and “SHR-PRO” are present on the application handpiece. Therefore, the device can be generally identified as an IPL hair removal and skin rejuvenation system.

The primary uses of the device, as understood from the modes on the screen interface, are as follows:

• Dye-HR (Hair Removal): Hair removal, epilation.
• Dye-SR (Skin Rejuvenation): Skin rejuvenation.
• SHR (Super Hair Removal): Super Hair Removal technology.

A total of 1 main unit and 1 application handpiece connected to the device are visible in the images.

Physical State and Condition

The device appears to be in used but good and well-maintained condition overall. No major scratches, cracks, dents, or discoloration have been observed on its white casing. Its surface is clean and gives the impression of being regularly maintained. The green “PASSED” sticker on the rear panel of the device suggests it has gone through a quality control process. There are no physical defects on the touchscreen surface other than a few smudges or reflections.

Mechanical and Electronic Components

The mechanical parts of the device appear to be in order. The wheels, the movable mechanism holding the screen, and the handpiece holder are in solid condition. Safety components, such as the emergency stop (STOP) button and the laser warning label, are present on the front panel of the device. The device’s plug is connected to a socket, its screen is active, and the red indicator lights on the front panel are illuminated. This indicates that the device’s electronic system is functioning and receiving power. No crushing, wear, or damage is visible on the protective hose connecting the handpiece to the main unit.

Screen and Interface Analysis

The device’s large touchscreen is in working order, and its interface is clearly visible. The analyzed screen images include the following:

• Start Screen: A welcome screen with an “IPL” logo and a “Start” button.
• SHR Mode: In this mode, it is seen that parameters such as Frequency (03 Hz), Energy (15 J/cm²), and Pulse Width (03 ms) can be adjusted. The “READY” indicator in the center of the screen signifies that the device is ready to fire.
• Dye-HR Mode: This screen features saved programs like M1, M2, M3, and settings for Pulse and Energy. The “READY” status is also active on this screen.

In the bottom-left corner of the screen, there is a counter displayed as “00000 >0<“. This could indicate that the device’s total shot counter is at zero or has been reset, or it might represent the shot count per session.

Label and Accessory Information

The visible labels and information on the device are as follows:

• Application Handpiece: It is inscribed with “DPL” and “SHR-PRO”.
• Safety Labels: The front of the device has a standard laser warning symbol and a label for the “STOP” button.
• Technical Label: A technical information label is present on the rear panel; however, due to the low resolution of the images, the serial number, model code, or other technical data on it cannot be read.

No additional accessories, box, user manual, or documents, other than the application handpiece, are present in the images.

Potential Malfunction Risks

Based on the visual inspection, no evidence of an existing malfunction (e.g., broken parts, error messages, abnormal noises) has been detected. The device’s overall condition, cleanliness, and operational status suggest that it has been regularly maintained and has a low risk of malfunction. Even on moving parts susceptible to wear, such as the hose connecting the handpiece to the device, there is no visible wear. This assessment is a forecast based solely on visual evidence and does not constitute a guarantee of the device’s future trouble-free operation.