Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 21.10.2025
Laserpsec Dios II Laser Hair Removal Device Analysis Report
General Assessment and Device Identification
The device shown in the visuals is a laser hair removal unit understood to be used in professional aesthetic and cosmetic fields. The product consists of a main body and an application head connected to this body via a flexible hose. It has a wheeled design, allowing it to be easily moved.
The products subject to the report are listed below:
- 1 Laserpsec Dios II main unit
- 1 application head (handpiece)
- 1 power cable
Brand and Model Information
As a result of examinations carried out on the device, brand and model information has been clearly identified. The brand name Laserpsec is written in capital letters on the side panel of the device. On the front panel, the model name Dios II is visible just below the application head slot. Additionally, the model code LPS-808 is stated on the device’s rear label. This information confirms that the device’s brand is Laserpsec and its model is Dios II.
Physical Condition and State
The general condition of the device, when evaluated through the visuals, appears to be used but well-maintained. No major scratches, dents, cracks, or color fading have been observed on its white and purple colored casing. The surfaces generally have a clean appearance, and there are no signs of significant deformation.
Mechanical and Electronic Component Examination
The mechanical and electronic components of the device are visually in good condition.
- Cooling Fans: There are three ventilation fans at the back of the device and two on the side panel. The fan grilles appear physically robust and clean.
- Wheels: The wheels located at the bottom of the device provide mobility and show no signs of breakage or damage.
- Control Buttons: The red emergency stop button and key input located on the front panel appear physically sound. The orange trigger button on the application head is also in place.
- Screen: A large touchscreen is located on the upper front part of the device. In the visuals, the screen is off, and therefore, its operational status or content cannot be analyzed. There are no cracks or deep scratches on the screen surface.
- Connection Points: The power cable input socket at the back of the device and the connected cable appear normal. No issues such as crushing or tearing have been observed on the hose connecting the head to the main unit.
Accessory and Label Details
One application head and one black power cable are seen with the device. The tip of the application head is metallic in color, and its body is white plastic, both physically in good condition.
The readable information on the device’s rear label is as follows:
- Model: LPS-808
- Power Requirement: AC220V±10% 50Hz
- Certification: CE mark is present.
The serial number or other production codes on the label cannot be read due to the resolution of the photographs.
Potential Malfunction Risk Assessment
Based on the examination of the visuals, no obvious physical damage, wear, or corrosion that could prevent the device from operating or lead to a malfunction in the near future has been detected. Since the device’s casing, accessories, and visible cables are in good condition, the risk of a malfunction due to physical state is considered low. However, the functionality of the screen, laser unit, and other internal electronic components cannot be confirmed solely by looking at the visuals.
