Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 21.05.2026
Report code: 1779358083
Fibroderms Pro XS Device Analysis Report
Device Identification and Credentials
The product in the images is a device used in aesthetic and cosmetic applications. The brand and model information are clearly legible on the front surface of the device. The brand of the device has been identified as Fibroderms, and the model as Pro XS. There is also a slogan on the device that reads, “Repairing is our business…”
General Status and Physical Condition
The general condition of the device is assessed as used. On the white plastic outer casing, particularly on the lower front section and side panels, superficial scratches, scuff marks, and slight soiling due to use are visible. The integrity of the casing is maintained, and no fractures, cracks, or deep dents have been detected. The control panel on the top of the device and the components on it are in place.
Mechanical and Electronic Component Analysis
There is one analog vacuum gauge (manometer) and one metal adjustment knob on the top control panel of the device. The glass of the manometer is intact, and the needle is visible. The adjustment knob is in place. One black fan vent is visible on each of the right and left side surfaces of the device. On the left side surface, just above the fan vent, a transparent plastic filter chamber or water trap is attached. Inside this chamber, there is a brownish/yellowish liquid accumulation and contamination. This indicates that the filter is full or requires maintenance. The rear part of the device, power input, sockets, or label information are not present in the images. Therefore, no information could be obtained regarding electronic connections, serial number, or year of manufacture.
Accessories and Missing Parts
Only the main body of the device and the filter chamber attached to it are visible in the images. The application heads (probes), connection hoses, power cable, or other accessories required for the operation of the device are not present in the images. It has been determined that these parts are missing.
Potential Failure Risks and Assessment
The wear on the outer casing of the device is cosmetic and does not pose a functional risk. However, the contamination and liquid accumulation seen in the side filter chamber may pose a risk of liquid ingress into the internal vacuum system of the device or may reduce vacuum performance. This filter needs to be cleaned or replaced. The general condition of the device appears suitable for use after the necessary maintenance is performed and the missing accessories are completed.
