Secondhand Positioning Air Mattress Sinaps SNS 8000 T

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 01.04.2026
Report code: 1775040476

Sinaps SNS 8000 Air Mattress System Analysis Report

Device Identification and Applications

The product shown in the images is a tube-type air mattress and motor (pump) system used to prevent the formation of pressure (bed) sores in bedridden patients. It is suitable for use in hospitals, nursing homes, and home care settings.

Brand and Model Information

The brand of the device and the mattress has been identified as Sinaps, and the model of the motor unit as SNS 8000. The brand information is located on both the mattress cover and the front panel of the motor. The model information is clearly stated on the label on the rear of the motor.

Quantity Information and Package Contents

The equipment identified in the images includes:

• 1 Sinaps SNS 8000 motor (pump) unit
• 1 tube-type air mattress (blue, with cover)
• 1 air hose connecting the mattress to the motor (integrated into the mattress)
• 1 power cable (integrated into the motor)

General Condition and Physical Deformation

The device is used and its general condition is good. No breaks, cracks, dents, or significant discoloration have been observed on the plastic casing of the motor unit. No tears or excessive wear marks are present on the mattress cover or the internal tube structure (sections labeled VENTILATED BLADER).

Mechanical and Electronic Component Assessment

The power and turn switches, along with the pressure adjustment dials on the front panel of the motor unit, appear physically intact. The bed edge hanging hooks and floor-gripping rubber feet located on the rear section are complete. There are no breaks or deformations in the air outlet sockets on the side. No crushing, peeling, or breakage has been detected on the power cable or its plug.

Control Panel Analysis

There is no digital display on the device. The controls on the front panel and their meanings are as follows:

• POWER: On/off switch for the device.
• TURN: On/off switch for the turning/alternating pressure function.
• NORMAL: Green LED indicator light showing that the device is operating normally.
• ALARM: Red LED indicator light signaling low pressure or a fault condition.
• PRESSURE: Pressure adjustment dial, graduated from 1 to 8, from minimum to maximum.
• P.A.S: Adjustment dial for switching between alternating (ALT) and static (STATIC) modes.

Label and Technical Information

The data on the label located on the rear of the motor unit are listed below:

• Model: SNS 8000
• Input Voltage: AC 220V / 50-60Hz
• Fuse Type: T1A / 250V
• Website: www.sinapsgrup.com

The label also includes the CE certification mark, the Class II electrical device symbol, and the BF type applied part symbol. No clear information regarding the year of manufacture, serial number, or lot number can be read from the images.

Originality and Documentation

The brand prints on the device, label quality, and compliance marks indicate that the product is original. No invoice, warranty certificate, or user manual is present in the images.

Existing Faults and Potential Risks

No broken parts, severed cables, or physical damage that would prevent the device from operating have been identified in the images. The device’s condition is good, and based on the visual data, no significant potential fault risk has been observed.