Secondhand Sinaps SNS 8000 T1 Positioning Air Mattress

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 21.07.2025

Rima Sinaps Positioning Air Mattress Analysis Report

Device Identification and Area of Use

In the images, there is a medical air mattress system laid out on a hospital bed. This system consists of one tube-type air mattress and one compressor (control unit) motor that enables the inflation and control of this mattress. The primary function of the product is to prevent pressure sores (decubitus ulcers) that may arise from long-term confinement to bed for bedridden patients and to assist in the treatment of existing sores. The system changes the pressure on different parts of the body by periodically inflating and deflating the air cells, thereby supporting blood circulation. It is also understood to have a positioning feature with the “TURN” function.

Brand and Model Information

Based on the evidence in the images, the brand and model information is specified below. It has been considered that the mattress and bed frame brands may be different.

• Patient Mattress Brand-Model: Based on the “RIMA” and “Sinaps” inscriptions on the compressor unit, the brand of the product has been identified as Rima and the model as Sinaps.
• Hospital Bed Brand-Model: The brand or model of the hospital bed on which the mattress is placed cannot be identified from the images. The bed frame is not part of the air mattress system being analyzed in this report.

Quantity Information

The images show 1 Rima Sinaps air mattress and 1 control unit (compressor) belonging to the mattress.

General Condition and Physical Deformation

The overall condition of the product is assessed as “lightly used and in good condition.” It was observed that the device is not new but has a clean and well-maintained appearance.

• Air Mattress: The blue air cells that make up the mattress appear complete and undamaged. No tears, rips, or significant stains were observed on the mattress surface or its cover.
• Control Unit: The white and gray plastic casing of the compressor is generally clean. The label and text on the front panel are legible, and there is no peeling. Apart from minor, insignificant scratches that may occur with use, no significant cracks, breaks, or color fading were detected on the casing.

Mechanical and Electronic Components

No visual problems were detected in the mechanical and electronic components of the device.

• Mechanical Components: The hanging hooks that allow the control unit to be attached to the side of the bed appear sturdy. The “PRESSURE” and “P.A.S” adjustment knobs and the “POWER” and “TURN” on/off switches on the front panel are physically in place and undamaged.
• Electronic Components: It cannot be determined from the images whether the device is in working order; however, there is no visual evidence (e.g., burn marks, damaged cables) indicating an electronic malfunction.

Control Panel Analysis

The control panel consists of analog knobs and LED indicators. The functions on the panel are as follows:

• POWER (ON/OFF): The power switch to turn the device on and off.
• TURN (ON/OFF): The switch that activates the mattress’s positioning (turning) feature.
• PRESSURE Knob: Used to adjust the air pressure inside the mattress and thus its firmness (in the MIN – MAX range).
• P.A.S Knob: Used to select the operating mode of the mattress. It has two modes: “ALT” (Alternating – Alternating Pressure) and “STATIC” (Static – Constant Pressure).
• LED Indicators: There are two status lights: “NORMAL” (indicates the device is operating normally) and “ALARM” (indicates a potential problem or low pressure).

Label and Other Information

No label containing detailed technical information such as the product’s serial number, REF code, lot number, or year of manufacture is visible in the images. Similarly, no information regarding the device’s usage time, documentation, or any existing malfunction could be accessed.

Potential Fault Risk

The visual inspection shows that the overall condition of the device is good. No significant risk that could indicate a potential fault, such as serious wear, rust, or crushed cables on the air mattress or control unit, has been observed. The current physical condition of the product suggests it is suitable for regular use and well-maintained. This assessment is an observation based solely on visual evidence and does not definitively mean that a technical malfunction is absent.