Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 10.11.2025
Betaconnect Injection Device Analysis Report
Overview and Device Identification
The images show one Betaconnect brand injection device and its plastic storage case. The product appears to be an auto-injector designed to facilitate medical injection procedures. The device features a Bayer logo, indicating its affiliation with this company.
Brand and Model Information
The brand and model of the device shown in the images have been clearly identified:
- Brand: Betaconnect
- Model: Not specified, but the device is branded as “Betaconnect™”.
- Manufacturer Logo: The Bayer logo is located on the bottom part of the device.
Quantity Information
A total of two product pieces are shown in the images:
- 1 Betaconnect injection device
- 1 blue and white plastic storage case with a transparent lid
Overall Condition
The general condition of the device is assessed as used. There are some minor signs of use and light dirt on its plastic casing, but overall, it is observed to be in good condition. The device’s storage case also appears functional and shows no significant damage.
Physical Assessment
Upon examining the product’s physical condition, the following details were identified:
- Casing: A small stain or dirt mark is present on the front surface of the device’s white main casing, to the left of the “BETACONNECT™” inscription. Generally, no major scratches, dents, or cracks were observed.
- Buttons: There is no wear or damage on the power button and the other circular button located on the front panel.
- Internal Mechanism: When the device’s interior is opened, the visible blue and white plastic components have a clean and robust appearance. The orange adjustment tabs inside are in place and show no mechanical issues.
Electronic and Mechanical Components
As far as can be understood from the images, the mechanical parts of the device are complete and functional. In the photo showing the device’s interior, no breaks or deformations were detected in the blue section where the injection mechanism is housed. The LED indicator light section on the front of the device is in a closed state. It cannot be determined from the images whether the electronic components of the device are operational.
Label Information and Technical Details
The information on the label inside the device is listed below:
- Brand/Model: BETACONNECT™ REF 85731456
- Serial Number (SN): H1A37FDP04120374
- FCC ID: 2AJO1-BETACON
- IC: 21743-BETACON
- Other Information: 2018-11-06, IP22, CE mark, WEEE (Waste Electrical and Electronic Equipment) symbol, and other technical symbols are present.
- Compliance Information: At the bottom of the label, there is an inscription stating “1.25ml / For Device / With Device”.
Accessories
The device is shown with a specially designed plastic storage case. The case has a transparent lid and a blue inner cradle. No other accessories, such as a charging cable or needle, which might be necessary for the device’s operation, are present in the images.
Potential Malfunction Risk
No conditions that could pose a potential malfunction risk, such as severe wear, rust, breakage, or crushed cables belonging to the device, were observed in the images. The device is generally in a well-preserved condition, and there are no visible problems with its mechanical components.
