2 Pieces Secondhand Topcon RMA-2000 Autorefkeratometer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 24.08.2025

Topcon RM-A2000 Auto Refractometer Analysis Report

Overview and Product Description

The images display two medical devices used in the diagnosis of eye conditions. The “TOPCON” brand and “AUTO-REFRACTOMETER RM-A2000” model information on the devices clearly confirm their identity. A total of two main devices are featured in the provided images.

• Brand: Topcon
• Model: RM-A2000
• Product Type: Auto Refractometer (Eye refractive error measurement device)
• Quantity: 2 Units

Application Area

These devices are specialized equipment used in the fields of ophthalmology and optometry to objectively measure refractive errors (myopia, hyperopia, astigmatism) in patients’ eyes. The data obtained plays a fundamental role in creating eyeglass and contact lens prescriptions.

General Condition and Physical State

Both devices are used products. While exhibiting cosmetic wear consistent with their age, their mechanical integrity appears to be maintained. No comment can be made regarding the functionality of the devices, as there is no visual evidence of them being operational.

• Casing: The beige plastic casings of the devices show noticeable yellowing, likely due to time and exposure to sunlight. This indicates that the devices are an older model.
• Scratches and Deformations: No serious cracks, fractures, or dents were observed on the casing. However, small superficial scratches and marks due to use may be present. A small blue sticker is affixed to the front panel of one device.
• Screens: The small-sized screens on the devices appear physically intact, with no cracks or fractures observed on their glass. Since the devices are not operational, no comment can be made on the functionality of the screens.

Mechanical and Electronic Component Examination

The mechanical and electronic components of the devices appear to be in place, as far as can be understood from the images. No missing parts or obvious damage have been detected.

• Mechanical Parts: All movable parts, such as joystick levers for adjusting patient position, forehead and chin rest units, and various adjustment knobs, are in place. No breakage or missing parts are visible.
• Electronic Ports: Both devices have a “DATA OUT” port located on their front-bottom section, used for data transfer. No visible bending or damage to the port pins is observed.
• Buttons: Control buttons such as “POWER” and “PRINT” are present on the base of the devices and have not undergone physical deformation.

Accessories and Missing Parts

No additional accessories (power cable, data cable, printer, user manual, etc.) other than the devices themselves are present in the images.

Label and Code Information

Beyond the brand and model information, labels containing detailed technical information such as serial numbers, REF codes, or year of manufacture are not legible due to the angle of the provided images. Therefore, this information could not be added to the report.

Potential Risk Assessment

Upon examining the general condition of the devices, the most prominent risk factor is cosmetic wear due to their age. The yellowing of the casing indicates that the devices have been in use for a long time. Performance issues can occur over time with old electronic devices. However, there is no direct evidence in the images of the devices being faulty (e.g., broken parts, rust, burn marks). The seemingly intact mechanical components suggest that they could remain functional if used carefully.