Secondhand Biosan FVL-2400N Combi Spin

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 12.09.2025

Biosan FVL-2400N Mini Centrifuge Analysis Report

Overview and Device Identification

The images show one Biosan FVL-2400N model mini centrifuge device and its attached power cable, used for separating and mixing small volume samples in a laboratory setting. The product, also known as “Combi-Spin”, features a compact design offering both centrifuge and vortex functionalities. These devices are commonly used in genetics, biochemistry, microbiology, and clinical laboratories. A total of two product components were observed: one main device and one power cable.

Brand and Model Information

The brand and model information is clearly legible on the device. Its brand is Biosan, and its model is FVL-2400N. This information is located on a blue strip on the device’s front panel. The brand and model information is 100% consistent with the text in the images, and there is no ambiguity regarding this.

General Condition and State

The device generally appears to be in good condition and clean. With its white main body and transparent top cover, it gives the impression of being lightly used. No significant discoloration, rust, or heavy dirt is observed in any section. The product’s physical integrity is complete, and it appears well-maintained.

Physical and Mechanical Assessment

Upon detailed examination of the product’s physical and mechanical components, no adverse findings were noted.

• Casing: The device’s plastic casing has no cracks, dents, or deep scratches. The surface is generally smooth.
• Lid: The transparent top lid is sturdy, and there is no deformation that would obstruct visibility or hinder its use. The lid mechanism appears to be in place and functions without issues.
• Rotor and Chamber: The black rotor and white centering adapter located inside the device are clean and undamaged. The numbering (1-10) and text on the rotor are legible.
• Control Panel: The black on/off switch and other function button on the front panel are in good physical condition. The markings on them have not worn off.
• Power Cable: No crushing, breakage, or wear is observed on the black power cable and plug connected to the device.

Technical Information and Labels

The device features important technical information for use, particularly on the rotor section. The label information legible from the images is as follows:

• Maximum Speed: The rotor features the inscription “Max. Speed 6000 rpm”. This indicates that the device can reach up to 6000 revolutions per minute.
• Rotor Information: The expression “R-1.5” is present on the rotor, indicating that the rotor is suitable for use with 1.5 ml tubes.
• Model Number: The model code “FVL-2400N” is clearly visible on the front face of the device.
• Warnings: A standard safety warning, an exclamation mark within a yellow triangle, is present on the device. Additionally, a usage warning “Do not use without screw” is located on the rotor.

No separate label containing the device’s serial number, lot number, or REF code was identified in the images.

Potential Risk Assessment

Based on the examination of the images, no obvious risk factors that could prevent the device from operating or lead to a malfunction in the near future were detected. The integrity of the casing, the health of the cable, and the clean and undamaged appearance of the mechanical parts indicate that the product’s current condition is good. There are no broken parts, signs of liquid leakage, or burn marks. Therefore, based on the visual condition of the product, the potential risk of malfunction is assessed as low.