Secondhand Elektro-mag M 815 A Centrifuge

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 20.02.2026

Elektro-mag M 815 A Laboratory Centrifuge Analysis Report

Device Identification

The device in the examined image is a desktop laboratory centrifuge used to separate biological or chemical samples according to their density. The product consists of a single-piece main unit.

Brand and Model

The writings and logos on the product in the image have been thoroughly examined. The manufacturer’s logo and name elektro-mag are clearly visible in the bottom right corner of the device’s control panel. On the blue strip on the left side of the device’s top lid, the model number M 815 A is clearly legible. In light of this visual evidence, it has been confirmed that the brand of the device is Elektro-mag and its model is M 815 A. Additionally, the product’s description “GENERAL PURPOSE LABORATORY CENTRIFUGE” is stated on the control panel.

Originality

The brand logos on the device, the placement of labels, the model number printing, and the quality of industrial design indicate that the product is an original Elektro-mag production. No inconsistencies suggesting it might be an aftermarket or copy product have been observed.

Areas of Use

This device is used in laboratory environments (hospitals, research centers, universities, etc.) to separate blood tubes or other liquid mixtures into their components by spinning them at high speeds. It is generally a basic piece of equipment in medical analysis processes such as obtaining serum, separating plasma, or performing urine sediment analysis.

Quantity Information

There is 1 main device in the image.

General Condition and State

The device appears clean and well-preserved from the outside. Despite being cosmetically used, it is in good condition. No signs of yellowing or significant wear on the body are immediately apparent.

Physical Deformation

Upon examination of the product’s outer casing (body and lid), no deep scratches, breaks, cracks, or dents have been detected. The plastic components retain their white color. The lid fits properly, and no misalignment is observed.

Mechanical and Electronic Components

In the image, the internal rotor (rotating part) of the device is not visible because the lid is closed, so there is no visual data regarding the rotor type. The control panel on the front of the device and the rotary control knob (encoder) located beneath it appear intact. The electronic panel appears active, and the screen is operational.

Screen Analysis

The device features a color TFT LCD screen on its front panel. The screen is on and active in the image. The following information can be read on the screen:

• Orpm: It is understood that the device is currently in a stopped position (0 revolutions/minute).
• Menu Options: Program memory options such as “CGF”, “RPM”, “P1, P2, P3, P4, P5” are visible on the device’s interface.
• Command Indicators: Command buttons or status indicators such as “START”, “STOP”, “PULSE”, and “LID” are present on the screen.

Labels and Warning Texts

English warning texts are located on the blue strip where the device’s body and lid meet. The legible parts from the image are as follows:

• PLEASE PRESS TO CLOSE LID PROPERLY: Please press to close the lid properly.
• WITH EQUAL WEIGHTS: Warning that the rotor should be balanced with equal weights.
• THE USER’S MANUAL: Reference to the user’s manual.
• YOU READ “COMPLETED” ON DISPLAY: Warning not to open the lid until “completed” is read on the display.

Accessories and Connections

A black power cable partially emerging from the left side of the device is visible. Other than this, no external accessories (rotor buckets, spare tube carriers, etc.) or warranty certificate are visible in the image.

Existing Malfunctions and Potential Risks

There is no physical evidence in the images (broken part, error code on screen, etc.) indicating that the device is faulty. The screen displaying “0rpm” suggests that the device is in standby mode and its electronic system is powered. There is no visible deformation in the cables or rust marks on the casing. The product appears ready for operation and risk-free in terms of its general condition.