Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 07.08.2026
Report code: 1786099735
HETTICH EBA 200 Centrifuge Device Analysis Report
Device Identification and Brand Model Information
The images show a centrifuge device used in a laboratory environment. Upon examining the logos and inscriptions on the front and side of the device, it has been clearly identified that the product is a HETTICH brand EBA 200 model centrifuge.
Authenticity Assessment
Considering the general appearance, logo quality, placement of labels, and craftsmanship details of the device, the impression is that the product is original. No signs of counterfeiting or low-quality production details have been observed.
Usage Areas
This centrifuge device is designed for the separation of small-volume samples. It features an 8-position fixed-angle rotor that can accommodate standard laboratory tubes, such as blood and urine tubes. It is ideal for working with small batches of blood, urine, and pediatric tubes in clinical chemistry applications. It is widely used in medical laboratories, research centers, and clinics.
Quantity Information
- Centrifuge Device: 1 unit
- Internal Rotor: 1 unit (6 tube slots are visible, but the model is known to have 8 slots.)
- Power Cable: 1 unit
General Condition and Physical Deformation
The general condition of the device is good and clean. No significant scratches, dents, cracks, or discoloration have been observed on its white outer casing. There is no accumulation of dirt or dust on the surface of the device.
Mechanical and Electronic Components
The lid of the device opens and closes smoothly. No fractures or deformations are visible on the lid hinges or plastic components. The physical condition of the buttons and the screen on the control panel appears to be good. The interior of the rotor is clean and shows no signs of mechanical issues.
Accessories
One power cable is visible with the device. The connection point of the cable is secure, and there are no signs of wear. There is a power socket input on the back of the device. There are 6 tube slots inside the rotor. No other accessories or spare parts are present in the images.
Battery Status
No internal or external battery belonging to the device is visible in the images. It is understood that the device operates by being connected directly to the electrical grid.
Label Information
There is some technical information on the label located on the back of the device. However, the resolution of the images is not sufficient to clearly read specific information such as the serial number, lot number, or REF code. Electrical values such as “230V~”, “50-60Hz”, “1.0A” and compliance declarations such as the CE mark are visible on the label. This information indicates the operating voltage, frequency, and current requirements of the device, and also shows that it complies with European standards.
Screen Analysis
The LCD screen of the device is on, and clear information is displayed. The number “6” in the top left corner of the screen likely indicates the rotor position or program number. The value “2700 RPM” in the center shows the rotation speed of the centrifuge in revolutions per minute. On the right side, the value “6:00” expresses the remaining operating time in minutes and seconds. The text “RPM/RCF” below the screen indicates the speed unit option. The control panel includes “START”, “STOP/OPEN” buttons and adjustment knobs.
Dimensions and Compatibility
Specific dimension information for the device is not provided in the images. However, based on its general appearance and typical products in the laboratory centrifuge category, it is understood to have a compact structure suitable for benchtop use. It is stated that the device supports 8 x 15 ml capacity tubes.
Year of Manufacture
There is no direct label or document regarding the year of manufacture of the device in the images. The general design and physical condition of the device suggest that it is modern laboratory equipment. However, due to the lack of concrete clues, a precise year of manufacture cannot be specified.
Documents
No invoices, warranty certificates, user manuals, or other documents belonging to the device are visible in the images.
Usage Duration
There is no information regarding the total operating hours or usage duration on the screen or labels of the device.
Existing Faults
No clear signs of faults such as broken parts, error messages, severed cables, or missing components that would prevent the device from operating have been detected in the images. The device’s screen appears to be on and functional.
Potential Risk of Failure
No concrete conditions that could pose a potential risk of failure, such as severe wear, rust, or crushed cables on the outer casing or visible mechanical components of the device, have been observed. The condition of the device is good.
