Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 29.08.2025
Artromot Continuous Passive Motion Device Analysis Report
Overview and Product Description
The product shown in the images is a Continuous Passive Motion (CPM) device used in physiotherapy and rehabilitation processes. This device is typically used after surgical interventions for knee and hip joints to prevent joint stiffness and accelerate the recovery process. The brand of the device, clearly visible on its casing, is Artromot. The mechanical structure of the product is designed to passively mimic the anatomical movement of the leg and has adjustable features. A wired hand remote control and an external foot support are also included with the product.
Usage Status and Condition
The device is generally in good condition and evaluated as “used”. While not a new product, no significant wear or damage has been observed on it. Apart from minor stains and superficial scratches, likely due to use, there is no major deformation on the plastic components that would affect its functionality. It is understood that the device has been kept clean and well-maintained.
Physical Deformation Examination
During the detailed visual examination, the following points regarding the physical condition of the device were identified:
- Casing: The beige plastic casing, which forms the main body of the device, has minor dirt and small stains at a few points.
- Scratches: Indistinct, superficial scratches were observed, especially around the control panel and on the side surfaces.
- Breaks or Cracks: No serious damage such as breaks, cracks, or dents was found in any part of the device.
- Straps: The textile straps used for leg fixation, although appearing slightly worn, are in functional condition.
Mechanical and Electronic Components
The mechanical and electronic components of the device appear to be in sound condition, as far as can be understood from the images. The “Flexion”, “Extension”, and “Tempo” adjustment sliders on the control panel are physically intact and movable. The movable joint points and the blue adjustment mechanisms of the device also appear sturdy. The casing and cable of the wired hand remote control attached to the device are intact. However, as the device is not shown in operational state, no comment can be made regarding the functionality of the electronic components. The digital display of the remote control is off.
Accessories and Additional Parts
The following parts were identified with the device in the images:
- Main Device: 1 unit of Artromot CPM device.
- Hand Remote Control: 1 unit of wired hand remote control attached to the device.
- Foot Support: 1 unit of separate, attachable foot/heel support.
- Straps: Straps mounted on the device and one separate fixation strap observed.
Whether any parts are missing cannot be determined, as the original set contents of the product are unknown. No other accessories such as a box, extra cable, or user manual are present in the images.
Label and Code Information
The device features schematic drawings illustrating usage instructions and German explanations (“Vorbereitung”, “Anwendung”). However, during the examination, no label containing specific technical information such as Serial Number, REF Code, or Lot Number could be clearly seen.
Potential Malfunction Risk Assessment
Based on visual evidence, no immediate malfunction risk is foreseen for the product. There are no crushed cables, cracked casing, or significant wear on mechanical parts. The overall structure of the device appears sturdy and in good condition. Aside from aesthetic flaws due to use, no serious indication of a potential malfunction was found. This suggests that the device is in a suitable condition for regular use.
