Secondhand Dego Cardiomed 3 3 Channel ECG Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 05.08.2025

Dego CardioMed 3 ECG Device Analysis Report

Overview and Device Identification

The device shown in the images is an electrocardiography (ECG) device. The “DEGO” and “CardioMed 3” inscriptions on the device’s casing clearly indicate its brand and model. This device is used in healthcare facilities, doctor’s offices, and for home visits to assist in diagnosis by recording the electrical activity of the heart and printing it on millimeter paper. The overall design of the device is made to offer portable and practical use.

Brand, Model, and Authenticity

The brand of the product in the image is Dego, and the model is CardioMed 3. Considering the quality of the logo and lettering on the device, the workmanship of the control panel buttons, and the general casing structure, the product is assessed to be original.

Physical Status and Condition Analysis

The device is a used product, and its overall condition is good for its age. Although the color of the casing appears to have slightly yellowed over time, this is not a defect that would affect its functionality. Details regarding the physical condition of the device are listed below:

• Casing: No cracks, fractures, or serious dents are observed on the ivory-colored casing of the device. There may be minimal signs of use on the surface, but it is generally clean.
• Control Panel: All buttons appear to be physically in place and intact. The symbols and text on the buttons are legible, and there are no signs of fading.
• Printer Compartment: The device has a built-in thermal printer. The printer cover is intact, and there are no visible issues with its mechanism. Inside the compartment, there is millimeter ECG paper, the edge of which appears slightly worn.
• Display: There is a small LCD on the device. Since the display is off in the image, it cannot be determined whether it is working or if there are any pixel defects.

Technical and Electronic Evaluation

The device is a 3-channel fully automatic ECG machine. On the control panel, there are buttons for adjusting the recording modes (Auto, M), filter options (Filter N), test function (Test), printing speed (mm/s), and sensitivity (mm/mV). Additionally, information such as lead selection (I, II, III, aVR, aVL, aVF, V1-V6) and patient heart rate (HR) is also seen on the panel. On the lower-left side of the device, a portion of a black coiled cable, likely belonging to the patient cable, is visible.

Label and Serial Number Information

In the examined images, no label or information plate containing the device’s serial number, lot number, reference code (REF), or manufacturing date is visible.

Accessory Status

The images show only one Dego CardioMed 3 main unit. Standard accessories required for ECG recording, such as the patient cable, clamp, and bulb electrodes, are not present in the image.

Potential Risk Assessment

Based on the visual inspection, no obvious malfunction or damage has been detected on the device. The physical condition of the casing and the control panel suggests that the device may have been used with care. However, as it is a used and electronic device, the status of its internal battery, the performance of the printer mechanism, and the full functionality of its electronic circuits can only be confirmed through a technical inspection. Since there is no visible significant wear or damage, the device’s potential risk of malfunction is assessed as low.