Secondhand Erbe ICC 50 Electrocautery Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 18.12.2025

ERBE ICC 50 Electrosurgical Unit Analysis Report

Device Identification

The device shown in the image is a high-frequency electrosurgical unit (also commonly known as a cautery device) designed for tissue cutting and coagulation procedures in medical settings. In addition to the main unit, there is a dual footswitch used to control the device’s functions, and an accessory in its packaging resting on the device.

Brand and Model

The brand and model information on the device’s front panel has been clearly and definitively identified. In the upper left corner of the device, the blue logo displays the ERBE brand, and directly below it, the model name ICC 50 is located. This information is in full compliance with the product’s industrial design and labeling.

General Condition and Cosmetic Inspection

The product appears to be in a visually clean and well-maintained condition. No noticeable deep scratches, dents, or cracks have been detected on its outer casing. The gray metal casing and front panel labels retain their integrity. No tears or excessive wear are visible on the front panel’s keypad overlay (membrane). Although the product is a used device (second-hand), it is in good aesthetic condition.

Quantity Information

A total of 3 main parts have been identified in the image:

• 1 ERBE ICC 50 main unit
• 1 cabled dual footswitch
• 1 cable set in transparent packaging

Areas of Use

The ERBE ICC 50 model is a compact device typically used in specialties such as polyclinics, dermatology, minor surgical interventions, and dentistry. It is suitable for monopolar cutting and coagulation procedures requiring low to moderate power, as well as bipolar coagulation procedures. The accompanying pedal allows the surgeon to start and stop the procedure using their foot without needing their hands.

Accessories and Connection Equipment

The accessories accompanying the device in the image are:

• Footswitch: Next to the device, there is a dual footswitch with a gray base, featuring one yellow pedal (typically for cut) and one blue pedal (typically for coagulation/coag). The pedal’s black connection cable is coiled around itself, and no visual crimps or breaks are observed on the cable.
• Packaged Cable: On the top surface of the device, there is an unopened gray cable in an original-looking transparent bag. Although the end structure cannot be fully distinguished through the bag, it is likely a device connection socket or patient plate cable.

Front Panel and Control Unit Analysis

The device’s front panel features a user-friendly interface and is divided into three main sections:

• Left Section (Power and Warnings): It includes a green on/off (I/0) switch, a neutral electrode (NE) indicator, and a “FEHLDOSIERUNG OUTPUT ERROR” (Incorrect Dosage/Output Error) warning light.
• Middle Section (CUT): It features a yellow background. “EFFECT 1” and “EFFECT 2” settings, a digital power indicator (seven-segment display), and up/down arrow buttons for power adjustment are present.
• Right Section (COAG / Coagulation): It features a blue background. LED indicators showing “FORCED,” “SOFT,” and “BIPOLAR” modes, a digital power display, and adjustment buttons are included.

Connection Sockets (Socket Inputs)

At the very bottom of the front panel, there are input ports for accessories, marked with symbols:

• NEUTRALE: Neutral electrode (patient plate) connection input.
• CUT / COAG: Monopolar handpiece (pencil) connection input.
• BIPOLAR: Bipolar forceps or accessory connection input.

Potential Malfunction Risk

During the visual inspection, no signs of cracks, oxidation, or severe physical damage were found on the device’s exterior, socket inputs, or cables. However, since the device was not shown in an operational state (with screens active), no conclusions can be drawn about its electronic functionality from the image. Its physical integrity suggests a low potential risk of mechanical malfunction.

Conclusion and Evaluation

The displayed ERBE ICC 50 Electrosurgical Unit stands as a complete set with its accessories (footswitch and packaged cable). The device’s exterior condition is clean, and its control panel appears intact. With its compact design and variety of accessories, it is a medical device designed for minor surgical operations, possessing high readiness for use.