Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 02.10.2025
ZMI ET 3000 Therapy Device Analysis Report
Device Description and Area of Use
The product shown in the visuals is an electronic therapy device bearing the model name “ET 3000”. The “INTENSITY” adjustment knobs (for intensity), current type options such as M.F., A.C., D.C., and GALV., and multiple output ports on the device’s front panel indicate that the product is a stimulation device used for electrotherapy in the field of physical therapy or rehabilitation.
Brand and Model Information
As a result of a detailed visual inspection, the brand and model of the device have been clearly identified. The label on the device’s rear panel indicates ZMI ELECTRONICS LTD. as the manufacturer. The model of the device, ET 3000, is clearly written on both the front and rear panels.
General Condition and State
Although the device is a used product, its general condition is quite good. No significant deformation or damage has been observed on its casing or control panel. The buttons, knobs, and labels are legible and in place. Its overall appearance suggests that it has been well-maintained and regularly used.
- Product Quantity: A total of 1 therapy device is shown in the visuals.
- Originality: The quality of the labels on the device, the CE mark, and the presence of detailed technical information indicate that the product is original.
Physical and Mechanical Assessment
The physical condition of the device has been examined in detail. There are a few small and light scratches on the top and edges of its white metal casing, resulting from use. The screen, buttons, control keys, and connection sockets on the front panel are completely intact and undamaged. The green power switch shows slight signs of use. The ventilation grille on the rear panel is clean and unbroken. No cracks, fractures, or defects affecting functionality have been detected in the device’s mechanical components.
Technical Details and Label Information
Important technical information is found on the manufacturer’s label located on the rear panel of the device. This information is listed below:
- Brand: ZMI ELECTRONICS LTD.
- Model (MOD): ET3000
- Serial Number (S/N): 0379
- Class (CLASS): 1
- Type (TYPE): BF
- Power Requirement: ~ 220-240V, 50/60Hz
- Fuse (FUSE): T400mA
- Power Consumption (VA): 45
- CE Mark: CE 0434
Accessories and Connection Ports
No accessories other than the device itself (such as power cable, patient connection cables, electrodes, etc.) are visible in the visuals. Therefore, no comment can be made regarding whether the box contents are incomplete.
Various connection ports are available on the device:
- Front Panel: There are four sockets marked A+, A-, B+, and B- for electrode connections, along with additional outputs labeled A/G and A/G/B.
- Rear Panel: There is one standard power cable input and one round metal socket whose purpose cannot be understood from the visual.
Potential Failure Risk Assessment
Based on visual inspections, there is no discernible evidence to suggest an immediate risk of failure in the device. The casing integrity is complete, cable inputs and sockets are undamaged, and ventilation channels are clear. The device’s generally clean and well-maintained condition indicates that it has been properly stored. Therefore, due to the absence of noticeable serious wear or damage, the potential risk of failure is assessed as low.
