Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 18.03.2026
Report code: 1773840237
Karl Storz Hopkins II 5020 Rigid Endoscope Analysis Report
Device Identification and Applications
The product shown in the images is a rigid endoscope used for providing visualization in minimally invasive surgery and endoscopic procedures. The 30° marking on the device indicates that the lens has a forward-oblique viewing angle. The product is designed to be integrated with a suitable light source and camera system for use in surgical operations.
Brand and Model Information
Based on the precise data obtained from the laser engravings on the device’s metal body, the brand and model information is listed below.
- Brand Karl Storz
- Model Series Hopkins II
- Product Code 5020
- Origin Germany
Physical Condition
The device generally appears clean and well-maintained. No scratches, dents, bends, discoloration, or cracks have been observed on the long metal shaft, the main body, or the black colored visor (eyepiece) part. The external condition of the device is very good.
Mechanical Components
The side connection adapter where the light cable is attached and the eyepiece parts appear sturdy. The straightness of the shaft is fully preserved. There is no visible wear or damage on the mechanical parts.
Label and Engraving Information
The permanent engravings on the device’s body and their meanings are as follows:
- KARL STORZ Germany Manufacturer company and place of production information.
- HOPKINS II The patented lens system series to which the device belongs.
- 30° Viewing angle of the optical lens.
- AUTOKLAV Indicates that the device is sterilizable with high heat and pressure in autoclave devices.
- 5020 The product’s reference (REF) code.
- 0BWA Alphanumeric code considered to be the serial or lot number of the device.
Accessories and Box Contents
The images show 1 rigid endoscope and 1 white styrofoam protective case molded to fit the device’s form. The box features multilingual texts indicating that the device has been tested (Gerät ist geprüft / Device has been tested / L’appareil est vérifié / Aparato ha sido controlado). No light cable or other external equipment is present in the images.
Authenticity Assessment
Upon examining the clarity of the laser engravings on the device, the alignment of the fonts, the quality of the metal craftsmanship, and the smooth structure of the eyepiece part, the product is assessed to be an original Karl Storz production.
Fault and Risk Status
No broken parts, rust, shaft curvature, or deformation belonging to the device have been detected in the images. Based on its external condition, no potential fault risk has been observed in the device.
