Secondhand Olympus Visera OTV-S7 Endoscopy System

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 17.12.2025

Olympus Visera OTV-S7 Digital Image Processing Unit and Camera Head Analysis Report

Device Identification

The product examined in the visuals is a professional digital image processor (Digital Processor) and a compatible camera head set used in medical endoscopy procedures. The product set consists of a main control unit and a wired camera head placed on top of the unit. This set, resting on a table or counter in the images, is part of surgical and diagnostic imaging systems.

Brand and Model

As a result of detailed examination of the product in the visuals, the brand and model information has been definitively identified as follows:

• Brand: Olympus
• Product Series: Visera
• Device Model: OTV-S7
• Device Type: Digital Processor
• Camera Head Brand/Model: In the close-up examination in Visual 3, the OLYMPUS brand and the OTV-S7 model designation are clearly readable on the neck of the camera head.

Originality

The product’s front panel design, logo fonts, color codes (Olympus’s characteristic blue tones), button placements, and “CE” certification marks (visible on the connector) are consistent with industrial standard craftsmanship quality. The orderly text prints on the panel and the complexity of the connector structure indicate that the product is Original.

Areas of Use

The Olympus Visera OTV-S7 is used in endoscopic procedures performed in specialties such as general surgery, urology, gynecology, and gastroenterology. The primary function of this device is to process signals coming from the endoscope camera sent into the patient and transmit them to the monitor. The camera head in the visual connects to the endoscope, while the main unit adjusts the image’s color, brightness, and sharpness.

Quantity Information

There are a total of 2 main components in the visuals:

• 1 Unit OTV-S7 Digital Processor (Main Unit)
• 1 Unit OTV-S7 Camera Head and Cable

General Condition

The device is a used product. A slight yellowing and color change due to age are observed on the device’s outer casing, especially on the white/beige plastic surfaces. However, the device’s integrity is preserved, and no significant structural damage is visible from the outside.

Physical Deformation

On the device’s top cover, there are superficial black friction marks and slight stains due to use. Very slight abrasions are present on the upper left corner and edges. However, no deep cracks, breaks, or dents have been detected on the casing. There are no visible tears or peeling on the camera head and its cable.

Mechanical Components

The “PUSH” mechanism camera input cover on the front panel appears to be in place and intact. The ventilation grilles on the sides are open and clean, with no visible blockages or broken fins.

Electronic Components

The internal electronic components of the device are not visible through the visual. The LED indicators and control buttons on the front panel are physically in place. Although the on/off status of the power switch cannot be fully distinguished from the visual, its physical integrity is complete.

Accessories and Connections

The following accessories and details have been identified on the device:

• Camera Head: The black wired component resting on the unit is the “Camera Head” of the system. The connector end is wide and designed to connect to the processor. The camera tip has a circular and pinned structure for connecting endoscopes.
• Cable Management: The camera cable is bundled with a yellow rubber band, suggesting the product is stored or being prepared for shipment.
• Connector Input: The main camera input port on the front of the device is empty (no cable connected), and the cover mechanism is in the closed position.
• Power Cable: No electrical/power cable belonging to the device is visible in the visuals.

Battery Status

This type of desktop medical processor typically operates with mains electricity (AC) and does not provide operational use with an internal battery. No external battery unit is visible in the visuals.

Label and Control Panel Information

The following labels and controls related to the user interface are located on the device’s front panel:

• Left Section: Brand, Model, and “Digital Processor” designation. A green LED indicator area and the “I/O” power button.
• Middle Section: Control buttons are located on a blue strip.
  • CONNECTOR: The area where the camera connection socket is located.
  • WHITE BALANCE: Button and symbol used for white balance adjustment.
  • EXPOSURE: Exposure (light intensity) adjustment. A scale (0, +, -) indicating control is provided via arrow buttons between “Min” and “Max” levels.
  • MENU: Left-right arrow keys and an enter button for menu navigation.
• Right Section: A section labeled “B.O.D.” and an adjacent warning symbol (exclamation mark in a triangle) are visible. On the right side, there is a gray covered area (likely an expansion slot or memory card input).

Potential Failure Risk

Potential risks that can be reported based on visual inspection are as follows:

• The connector joint points of the camera cable are sensitive; although the cable is tightly bound with a rubber band in the visual, it cannot be known without testing whether there are internal wire breaks. However, the outer sheath appears intact.
• Due to the age of the device, there may be a decrease in the tactile sensitivity of the front panel buttons, but there are no sunken or missing buttons.
• Its general condition is clean and good, with no prominent risky corrosion or heavy impact marks.