Secondhand Prestige ENT Treatment Unit

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 18.12.2025

Endoscopy Imaging System and Medical Device Station Analysis Report

Device Detection and Identification

The visuals show a group of medical devices interconnected and configured as an endoscopy/surgical imaging system. The system consists of a main medical trolley, electronic devices placed on it, one monitor, and a separate mobile unit standing next to the system. Essentially, imaging and support units used in diagnosis and surgical interventions are present.

Brand and Model Analysis

Precise brand and model information identified by examining the logos and labels on the devices in the visuals is as follows:

• Camera Control Unit: The SinoCAM II logo and the “PAL” designation are clearly visible on the front panel of the device. This device is an endoscopic camera processor.
• Cold Light Source: Part of the brand logo on the blue and white front-paneled device is legible as “bah…zer” (matching the well-known Baholzer brand in the endoscopy market). The model name is clearly written as Flash 250-D on the label.
• Independent Unit (Mobile Tower): On the front face of the wheeled, grey-white unit next to the system, the word Prestige is visible in a handwritten style, along with the CE 1294 certification code.
• Monitor: The SUNNY brand is located on the bottom bezel of the black monitor positioned at the top of the system.

Areas of Use

This system is designed for endoscopic (minimally invasive) surgeries and diagnostic procedures in specialties such as general surgery, ENT, urology, or gynecology. While SinoCAM II processes the image signal, Flash 250-D provides the high-intensity light required for the operating field via a fiber optic cable. Considering the manometer (pressure gauge) and tube inlets on the “Prestige” unit located on the side, it is understood that this device is used as an arthroscopy pump, insufflator, or high-vacuum surgical aspirator/irrigation unit.

Physical Condition and Cosmetic Examination

The general cosmetic condition of the devices can be classified as “used” but “well-preserved.” As far as can be understood from the photos, there are no noticeable major deformations such as deep scratches, dents, or cracks in the paintwork or plastic parts of the trolleys. Slight surface dust accumulation and dulling due to use and time may be observed on the upper grey plastic surface of the “Prestige” unit, but its integrity remains intact.

Electronic and Mechanical Component Analysis

The buttons, switches, and socket inputs on the front panels of the devices appear physically intact:

• SinoCAM II: All “Camera In”, “White Balance”, “Window”, “Boost”, and “Power” buttons are in place. No corrosion or broken parts are visible in the socket inputs.
• Flash 250-D: The light intensity adjustment knob (potentiometer), “Lamp 1” and “Lamp 2” switch (indicating dual lamp support), and fiber optic cable input are intact.
• Prestige Unit: The manometer glass on the upper section is intact. The metal hose/probe holders on the front are in place. The wheeled structure of the device indicates its mobility.

Accessories and Connection Units

The accessories seen with the system in the visuals are as follows:

• 1 packaged/bagged black spiral cable (next to the camera unit, likely belonging to the camera head or image transmission).
• A black electrical power cable wrapped around the Prestige device.
• A 4-way black silicone or plastic tube holder/probe slot on the Prestige device.
• A blue connection attachment/connector is attached to the upper panel of the Prestige device.

The camera head (handpiece) and fiber optic light cable are not clearly visible as a whole in the visuals; only a tangle of cables is seen. A physical inspection may be required to ascertain if these parts are complete.

Screen and Indicator Analysis

SinoCAM II and Flash 250-D devices are analog-display and button-operated systems; they do not include a digital screen. The monitor (Sunny) is in the off position, thus no comment can be made on the condition of the screen panel (pixel errors, cracks, etc.) based on the visual, but its physical integrity is complete. The manometer on the Prestige unit is an analog needle gauge and appears intact.

Potential Risks and Deficiencies

The manufacturing years and model types of the devices (e.g., “Flash 250-D” suggests halogen lamp technology, and “SinoCAM PAL” indicates an analog system) suggest they belong to an older generation compared to current digital HD/4K technologies. This could be a drawback in terms of spare parts availability or meeting the latest imaging standards. However, visually, there are no indications of serious malfunction risks such as breakage, rust, or cable detachment that would impede operation.

Quantity Information

In the visual area relevant to this report, the main elements are:

• 1 Monitor
• 1 Transport Trolley (Endoscopy Trolley with Drawers)
• 1 Camera Control Unit (SinoCAM II)
• 1 Light Source (Flash 250-D)
• 1 External Medical Unit (Prestige)

for a total of 5 main parts, along with various cable accessories found on them.