Secondhand Plusmed Plus-800G Fetal Monitor

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 07.08.2025

plusMED Plus-800G Fetal Monitor Analysis Report

Overview and Device Identification

The product in the images is one plusMED Plus-800G Fetal Monitor (cardiotocography or NST device) and its accessories. The device is a medical instrument used to monitor the fetal heart rate (FHR) and the mother’s uterine contractions (TOCO) during pregnancy and labor. Based on the logo, font characters, and overall workmanship on the product, the device is considered to be original.

Brand and Model

According to the information on the front panel of the device in the images, the brand and model details are specified below.

• Brand: plusMED
• Model: Plus-800G

Quantity Information

The following parts have been identified in the images:

• 1 plusMED Plus-800G Fetal Monitor main unit
• 1 Fetal Heart Rate (US) Probe
• 1 Uterine Contraction (TOCO) Probe
• 1 Event Marker Control
• 1 power cable

Physical Condition and Deformation Assessment

It is clearly visible that the device is a used product. There is yellowing on the plastic casing of the main unit, which has occurred over time. No cracks, fractures, or signs of serious impact were found on the device. The mechanical parts of the device, such as the buttons and the printer cover, are visually intact and show no significant damage. Significant discoloration and residue have been observed in the central yellow area of one of the probes (the US Probe). The other probe has a cleaner appearance.

Accessories and Cable Condition

There is a repair made with black electrical tape on the cables of the probes connected to the device. This indicates that the cables were previously damaged or worn and have been repaired. This repair may affect the reliability of the cable connections. The socket inputs on the device where the probes are connected are present and do not show any visual damage. The power cable is connected to the device.

Electronic Status and Screen Analysis

The device is seen to be powered on, and its screen is functioning. The screen displays graphs showing fetal heart rate and uterine contractions, along with numerical data. Some of the data read on the screen are as follows:

• FHR1 (Fetal Heart Rate): 149 bpm
• TOCO (Uterine Contraction): 9
• ALARM LIMITS: 110-160
• PRINT SPEED: 1 cm/min

This data indicates that the device’s basic measurement functions are active and operational.

Potential Fault Risks

The most significant risk identified in the images is the taped repair on the probe cables. Such repairs can lead to poor contact or signal loss over time, resulting in inaccurate measurements. Additionally, the significant discoloration and wear on the US probe suggest that its sensitivity may be reduced. Although the overall condition of the device is operational, this repair on the cable is a potential weak point and carries the risk of causing problems in the future.