Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 03.02.2026
WM Accumate 2300 Volumetric Infusion Pump Analysis Report
Device Identification, Brand and Model
The device in the image is a volumetric infusion pump designed to deliver fluids or medication treatments to patients in a controlled manner in the medical field. As a result of a detailed examination of the device’s front panel and labels, the brand was identified as WM, as indicated by the logo in the upper left corner, and the model as Accumate 2300, as clearly written in the middle of the panel. The upper right section of the device contains the phrase “VOLUMETRIC INFUSION PUMP” indicating the product type.
Visual Analysis and General Condition
The product is in used condition. While its general physical integrity is preserved, a detailed examination reveals dirt and dust accumulation in certain areas of the device (especially the label edges and cover joints in the upper right section) due to use. No significant cracks, fractures, or dents were detected on the casing; however, a need for cosmetic cleaning is observed. The carrying handle on the top of the device appears sturdy.
Screen and Indicator Analysis
The device is in working condition and its digital LED screen is active. The data on the screen at the time the visual was taken is as follows:
- Volume Delivered: 19.6 ml
- Delivery Limit: 90.0 ml
- Flow Rate: 5 11.3 ml/h (Digit display read according to the digits in the visual).
Additionally, three green LED lights are illuminated at the very top of the panel, indicating that the device is in active operating mode or process status. In the lower left corner, the green LED next to the symbol indicating power connection or battery status is observed to be active.
Control Panel and Function Buttons
The keypad on the front of the device is membrane-type and the inscriptions on it are readable. The available buttons are:
- Direction Buttons used for adjusting values (Up/Down arrows).
- SELECT button.
- Red STOP/CLR button.
- Blue/Turquoise START button.
- Yellow PURGE and POWER ON/OFF buttons.
- In the lower left, there is an LED panel related to power status (H, M, L indicators and AC plug symbol).
Label and Warning Information
A Turkish warning label, apparently added later, has been affixed to the top of the device. This label contains the following statements:
“ONLY USE INFUSION PUMP SETS! IV SETS OPERATING ON THE GRAVITY PRINCIPLE ARE NOT SUITABLE!”
This warning informs the operator that for the safe and correct operation of the device, only sets specific to this pump should be used, not standard gravity sets.
Accessories and Connections
A gray electrical power cable is seen extending from the rear left side of the visual, connected to the device. Other than this, no set, IV pole, or other external accessories are within the visual frame. The cover mechanism on the right side is closed, and there are superficial signs of use on the metal part.
Originality Assessment
The device’s logo, keypad layout, screen fonts, and label structure indicate that it is an original medical device manufactured to industrial standards. There is no visual indication that it is an aftermarket or counterfeit product.
Areas of Use
This device is used in hospitals, intensive care units, polyclinics, and veterinary clinics. It ensures that medications, nutritional fluids, or blood products administered intravenously to the patient are delivered with millimeter precision (ml/hour) at specified times and quantities.
Quantity Information
The visual contains 1 unit of WM Accumate 2300 infusion pump.
