Secondhand SMS Vent-V Anesthetic Mechanical Ventilator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 23.12.2025

Microprocessor Controlled VENT-V Respiratory Device Analysis Report

Device Identification

The examined image displays a microprocessor-controlled respiratory support device (ventilator) used for medical purposes. The device consists of a main unit block designed for desktop or portable use. The product in the image includes a control panel for setting and monitoring patient respiratory parameters and a mechanical flow control knob.

Brand and Model Analysis

Detailed examination of the product revealed the following identifying brand and model information:

• Product Description: The phrase “Microprocessor Controlled” is located in the upper right corner of the front panel, immediately next to the model name VENT-V, written in a prominent font.
• Reference Code: The code RNP-1005 is visible, positioned vertically in the lower right corner of the control panel. This code is assessed to be a production code related to the front panel design or a device model variation.

General Condition and Physical State

The device’s external casing and front panel are generally in good cosmetic condition. There are no noticeable deep dents, cracks, or signs of rust on the white external metal casing. The mounting screws on the top part of the casing are in place. The black control label (membrane) on the front panel is intact; no tearing or peeling has been observed. Only minimal age-related wear marks and slight dust accumulation may be visible at the edge joints.

Control Panel and Technical Specifications

The front face of the device offers a detailed interface for user interaction. Based on the data in the image, the device has the following technical functions:

• Rate (Bpm) Control: A digital display and up/down arrow keys are available for setting the respiratory rate (breaths per minute).
• I:E Ratio Control: A digital section is present for monitoring and adjusting the Inspiration/Expiration ratio.
• Pressure Settings: Buttons for setting alarm limits or target values for “Low Pressure” and “High Pressure” are available. The pressure unit “CmH2O” is indicated in the middle of the panel.
• Peak Indicator: An screen area is available to display the instantaneous peak pressure.
• Volume Monitor (ml): A digital display area for volume monitoring is located at the bottom left.
• Flow Control: In the lower center part of the device, there is a prominent metallic adjustment knob that can be turned manually, with “FLOW” written on it and a directional arrow. This mechanical part appears sturdy.
• Other Controls: “Auto” (Alarm Set), “Mute/Reset” (60-second alarm silence), and “ON/OFF” power buttons are present.

Battery and Power Indicators

Upon examining the LED warning lights on the panel, important information regarding the device’s power management has been obtained. The warnings on the panel are as follows:

• Int.Batt (Internal Battery): This is an LED indicator showing that the device has an internal battery.
• Low.Batt: This is a low battery warning.
• Charging: This light indicates the charging status.

These indicators confirm that the device is designed to operate even without mains electricity (during transport or power outages).

Accessories and Missing Items

Only the main unit (head unit) of the device is visible in the image. The following accessories are not present in the image:

• Power cable.
• Patient breathing circuits (hoses).
• Mask or endotracheal tube connectors.
• External humidifier unit (usually used with this type of device).
• Original box or user manual.

Areas of Use

Considering its features, the VENT-V is designed to provide mechanical ventilation support to patients suffering from respiratory failure in hospital intensive care units, emergency departments, or during patient transfer (transport ventilator). The presence of an internal battery indicator suggests that the device is suitable for mobile use (e.g., in ambulances or for in-hospital transfers).

Authenticity Assessment

The print quality on the device’s front panel, the layout of the buttons, industrial standard labeling (such as the RNP-1005 code), and the professional medical device casing structure indicate that the product is an original manufacture. It does not give the impression of being handmade or an assembled product.

Potential Malfunction Risk

No physical breakage or severe damage is observed on the device, which is mechanically reassuring. However, as the device’s screens are off (unpowered), it cannot be visually confirmed whether its electronic functions (screen brightness, sensor sensitivity, battery life) are operational. Mechanical parts, especially the “Flow” knob, are in place but their functionality should be tested. The device’s overall condition appears clean and well-maintained, with no visible critical risk factors (e.g., rusted sockets, burn marks).