Secondhand BiNefes SP-100 Home Mechanical Ventilator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 10.11.2025

BiNefes SP 100 Ventilator Device Analysis Report

Overview and Product Description

The images display a medical ventilator device used to provide respiratory support. The brand of the device has been clearly identified as BiNefes, and the model as SP 100. A total of 1 unit of the product and 1 unit of accessory, consisting of the device and a power cable, are exhibited. The overall design of the product indicates its suitability for use in hospital or home care settings.

Brand and Model Information

• Brand: BiNefes
• Model: SP 100

The brand and model information is clearly written on both the front and rear panels of the device. According to the information on the label, the product bears the “Made in TÜRKİYE” stamp.

Usage Status and Physical Condition

The device generally has a clean and well-maintained appearance, indicating that it has been used sparingly or well-preserved. No significant deformation such as noticeable scratches, cracks, dents, or discoloration has been observed on its body or screen. The device’s surface has a matte and smooth texture, and its physical condition is quite good.

Mechanical and Electronic Component Inspection

No problems were detected during the visual inspection of the mechanical and electronic components.

• Control Knob: The white, ribbed adjustment knob located on the front panel of the device is physically intact and clean.
• Ports and Connections: On the front panel, there are blue “Inspiryum” and white “Exspiryum” patient circuit connection ports. On the rear panel, there is an “O₂ in” (Oxygen Inlet) port. All ports appear visually undamaged and complete.
• Power Unit: At the rear of the device, there is an “on/off” switch and a fixed power cable input. The power cable shows no signs of crushing or wear and tear, and its plug is of a standard type.
• Filter: An air intake filter cover is present on the rear panel, and this cover is firmly in place.
• Screen: The device’s screen is off. There are no breaks, cracks, or deep scratches on the screen surface.

Label and Certification Information

The label on the rear panel of the device contains important technical details and certification information related to the product. This information is listed below:

• Type: SP-100 ventilator
• Serial Number (SN): SP1023192
• Barcode Number: 868289601007
• Protection Class: IP21
• Certifications and Symbols: Various standard conformity symbols, such as CE 1984 and MD (Medical Device) markings, are present on the device. This indicates that the product has been manufactured in accordance with medical device regulations and reinforces the impression that it is an original product.

Potential Risk Assessment

During the visual inspection of the images, no potential risks (such as rust, severe cable crushing, casing cracks, etc.) that could negatively affect the device’s operation or lead to a malfunction in the near future were detected. The current physical condition of the device indicates that it is ready for regular use.