Secondhand Hoffrichter Carat I Home Mechanical Ventilator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 16.07.2025

Hoffrichter Carat I Ventilator Analysis Report

Device Description and Area of Use

The images show one ventilator wrapped in stretch film. The symbols on the front panel and the O2 input on the rear panel indicate that the device is used for respiratory support or therapy. These types of devices are typically used in hospitals, home care settings, or healthcare facilities.

Brand and Model

The brand and model of the device in the images have been clearly identified.

• Brand: Hoffrichter
• Model: Carat I
• Type: 9LM102

Quantity Information

The images show one ventilator wrapped in stretch film. The device’s power cable or any other accessories are not present in the images.

General Status and Condition

The device is completely covered with stretch film. This suggests that the product has been prepared for storage or shipment. As seen through the film, the device’s main casing appears clean and well-maintained. It is understood that the product is used, but its condition is good. No significant dirt or wear has been observed on the device.

Physical and Mechanical Assessment

Upon inspection of the device’s casing, no significant deformation such as cracks, breaks, dents, or discoloration has been detected. The control knobs, buttons, and screen on the front panel appear to be intact. The ventilation grilles and socket inputs on the rear of the device are in good physical condition. No mechanical component issues have been visually identified on the device.

Label and Technical Information

The label on the rear panel of the device contains important technical information and codes. This information is listed below:

• Serial Number (SN): C081 2157
• Power Requirement: It is specified that it should only be used with “Type PS24” or “SNP-A129-HU” model power supplies.
• Oxygen Input (O2 INPUT): Maximum 15 l/min, 2000 hPa.
• Warnings: The warning “OUTLET, DON’T COVER!” is present.
• Place of Manufacture: The phrase “Made in Germany” is present.
• Certifications: The CE 0123 mark is visible.

Sockets and Inputs

There are various inputs on the rear panel of the device. Among these, a DC power input and an O2 (oxygen) input are clearly visible. The physical condition of these inputs is good; no damage or deformation has been observed.

Current and Potential Fault Status

Based on a visual inspection, no current faults (e.g., broken parts, error messages) have been detected on the device. As the device’s overall condition is good, no significant risk of potential faults is observed based on visual evidence. However, the power supply, which is necessary for the device’s operation and is not present in the images, needs to be procured. The functionality of the device can only be fully understood after it is tested with a compatible power supply.