Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 28.03.2026
Report code: 1774685810
Humidi As SN-100 Heated Humidifier Analysis Report
Device Identification and Basic Information
The product shown in the images is a heated humidifier device used in respiratory therapies. Based on the inscriptions on the device’s front panel, its brand has been definitively identified as Humidi As, and its model as SN-100. The product has the appearance of a standard medical device, and its print quality, labeling, and material structure give the impression of an original production.
General and Physical Condition
The device and its accompanying accessories are visually in new or unused condition. The original transparent packaging of the accessories has not been opened. No scratches, dents, cracks, discoloration, dirt, or physical deformation have been observed on the device’s outer casing.
Mechanical and Electronic Components
The black mechanical ON/OFF switch and the heater control dial (numbered 1 to 9) located on the device’s front panel appear physically sound. The circular heating plate on the upper part is clean and undamaged. Two green LED indicator lights, showing POWER and HEATER status, are present on the front panel. There is no digital display on the device.
Accessories and Parts
A total of 3 parts/accessories have been identified in the images, in addition to the main device unit:
- Water Chamber (1 Unit): A transparent water chamber positioned on the heating plate, featuring blue inlet/outlet ports. It is partially covered with transparent packaging containing manufacturer information and symbols.
- Breathing Circuit (1 Unit): A white, corrugated breathing tube, sealed within its transparent packaging, located on the left side of the device.
- Power Cable (1 Unit): A black power cable with a standard European-type plug, integrated into the rear/side of the device. The cable is wrapped with a white tie and is in an organized condition.
Label and Warning Information
The following information and warnings have been identified on the device and its packaging:
- Front Panel: Humidi As logo, SN-100 HUMIDIFIER model inscription, ON/OFF, POWER, HEATER, and Heater control (1-9) indications.
- Top Panel: A triangular symbol with wavy lines indicating a hot surface warning, along with the inscription CAUTION HOT, on the front right corner of the heating plate.
- Information on Packaging: On the water chamber’s packaging, the phone number (+90 0312) 395 77 67, a NON STERILE warning, CE mark, MADE IN TURKEY inscription, a temperature resistance symbol for -20°C to 60°C, a humidity symbol, and a DEHP symbol are legible.
Applications
This device is designed to be used in conjunction with mechanical ventilators, CPAP/BPAP devices, or high-flow oxygen therapy systems, for the purpose of heating and humidifying the respiratory air delivered to the patient. It is used to prevent the drying of airways in patients receiving respiratory support.
Potential Malfunction Risk Assessment
No wear, crushing, or rust has been observed on the device’s casing, heating plate, buttons, or power cable in the images. The device’s condition is very good, and based on visual data, no significant malfunction risk has been identified.
