Secondhand Sesan MT-015 5 Liters Steel Oxygen Cylinder with Valve

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 24.10.2025

Oxygen Cylinder and Regulator Analysis Report

Overview and Product Description

The visuals show an oxygen cylinder, understood to be for medical purposes, with a pressure-reducing regulator, flowmeter, and humidifier bottle mounted on it. This system is designed to reduce the high-pressure oxygen in the cylinder to a breathable pressure, adjust its flow rate, and humidify it before delivery to the user. The product is a medical gas system designed for patients requiring respiratory support. The exterior of the cylinder is covered with a white plastic mesh to provide protection against impacts.

Brand and Model Information

During a detailed examination, brand information was identified on different components of the device. This information is strictly based on the data clearly visible in the images.

• Cylinder Valve: The brand Kasweld and the standard ISO 10297 are clearly visible on the valve. Kasweld is a brand that manufactures gas fittings and pressure reducers.
• Pressure Gauge (Manometer): The brand Helta is readable on the dial of the pressure gauge.

No other brand or model information was found on the plastic parts of the oxygen cylinder or regulator. Therefore, this report only includes these two identified brands.

Physical Condition and Deformation Analysis

The general condition of the device is good, although it has been used. Upon evaluation of its physical state, the following details have been observed:

• Oxygen Cylinder: No major scratches, dents, or rust are observed on the blue cylinder’s paint. The protective mesh covering it is intact.
• Regulator and Components: There are no breaks, cracks, or significant deformation in the metal and plastic parts. Specifically, the transparent flowmeter tube and humidifier bottle appear intact and clean.
• General Cleanliness: The product generally has a clean and well-maintained appearance. No significant dirt or stains are present.

Technical Details and Accessories

The technical information and accessories obtained from the visuals are listed below:

• Quantity Information: 1 blue oxygen cylinder and 1 complete regulator set mounted on it are present.
• Pressure Gauge: The Helta brand manometer has a dial capable of measuring in both kgf/cm² and psi. The gauge can measure pressures up to approximately 250 kgf/cm² (approximately 3500 psi).
• Flowmeter: It is understood from the scale on the transparent tube that the oxygen flow rate can be adjusted. Although the numbers on the scale are not clear, it possesses standard medical flowmeter characteristics.
• Humidifier Bottle: The transparent bottle used to humidify oxygen has “UPPER” and “LOWER” level lines and the partially readable word “DISTILLED”. This indicates that the bottle should be filled with distilled water.
• Safety Warning: An important safety warning, “USE NO OIL UNDER 200BAR”, is located on a blue label on the regulator. This is a standard warning due to the danger of high-pressure oxygen coming into contact with oil.
• Accessories: A thin, transparent tube/hose connected to the regulator, used for oxygen delivery to the user, is visible. No other accessories (e.g., carrying bag, wrench, or mask) are visible in the images.

Important Notes and Potential Risks

Although the general condition of the product is good, as it is a used medical device, some points need to be considered. Based on visual analysis, no findings such as rust, dents, or cracks that would pose a serious risk of malfunction have been observed. The mechanical components (valves, buttons) appear solid and functional. The current condition of the device leaves a positive impression that it can continue to be used after appropriate maintenance and checks.