Secondhand Sesan MT-016 10 Liters Steel Oxygen Cylinder with Valve

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 09.04.2026
Report code: 1775728262

Medical Oxygen Cylinder and Regulator Set Analysis Report

Device Identification

The image features two medical oxygen cylinders and their integrated equipment, including regulators, flowmeters, and humidifier bottles. The system consists of essential respiratory equipment used to provide oxygen support to patients.

Quantity Information

• 2 units blue metal oxygen cylinders (one short, one long)
• 2 units regulators with pressure gauges (manometers)
• 2 units transparent flowmeter tubes
• 2 units transparent plastic humidifier bottles
• 2 units transparent oxygen delivery hoses
• 2 units white protective plastic mesh

Usage Areas

These devices are designed for patients suffering from respiratory failure or those in need of supplemental oxygen. They are suitable for use in hospitals, clinics, ambulances, and home care services. Humidified oxygen is delivered to the patient by adjusting the oxygen flow rate via the regulator and flowmeter.

General Condition and Physical Deformation

The blue paint on the outer surface of both oxygen cylinders is in generally good condition. No significant scratches, dents, rust, or discoloration have been observed on the bodies of the cylinders. White plastic mesh covers are attached to the upper parts of the cylinders to protect them against impacts. The equipment presents a generally clean and ready-to-use appearance.

Mechanical Component Assessment

The valve mechanisms, regulator connections, manometers, and flowmeters located on the cylinders appear physically intact. The short cylinder on the left features a star-shaped metal on-off valve. Although the valve section of the long cylinder on the right is partially obscured by the protective mesh, the brass-colored metal connection point is visible. No fractures or cracks have been detected in the humidifier bottles or connection fittings. The devices do not contain any electronic components.

Accessories and Connections

Standard oxygen regulator sets are connected to both cylinders. The sets include analog manometers that display the pressure inside the cylinders and transparent flowmeters used to adjust the oxygen flow rate. Transparent plastic humidifier bottles are screwed onto the bottom of the flowmeters. Transparent hoses, which facilitate oxygen delivery to the patient, are attached to the outlet ports of these bottles. No crushing or tearing is observed in the hoses.

Size and Compatibility

One of the cylinders in the image is shorter and has a wider diameter, while the other has a longer and thinner structure. This indicates that the cylinders have different liter capacities. The regulator sets attached to them appear compatible with standard medical oxygen outlets.

Potential Failure Risk

No significant wear, rust, or physical damage has been observed in the equipment shown in the image. The condition of the products is good. Based on the visual evidence, no significant risk of failure has been identified.