Secondhand Sesan MT-016 10 Liters Steel Oxygen Cylinder with Valve

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 05.09.2025

Medwelt Medical Oxygen Regulator and Oxygen Cylinder Analysis Report

General Assessment and Content

The visuals show an oxygen cylinder for medical use and a pressure regulator mounted on it. The brand of the regulator is clearly stated as Medwelt on the box and in the product details. The regulator consists of components such as a pressure gauge (manometer), flow meter (flowmeter), and humidifier, which are used to adjust the oxygen from the high-pressure cylinder to a flow rate suitable for the patient. The product set includes one 10-liter capacity blue steel oxygen cylinder, a complete Medwelt oxygen regulator with a Pamed brand pressure gauge mounted on the cylinder, one transparent humidifier chamber, and the cardboard box belonging to the regulator. The primary function of the equipment is to reduce the pressure from the oxygen cylinder, humidify the oxygen, and deliver it to the patient at an adjustable rate.

Condition and State Assessment

The general condition of the products is very good and close to new. No scratches, cracks, dirt, or deformation are observed on the regulator, humidifier chamber, or pressure gauge. There are very slight and superficial scuff marks on the blue paint of the oxygen cylinder, which may be due to storage or transport, but these marks are not of a nature to affect the device’s function. All parts appear clean and well-maintained. The presence of the packaging box suggests that the product has been used little or not at all. Overall, the products are in a ready-to-use and trouble-free condition.

Technical Details and Label Information

Various technical details have been obtained from the labels and markings on the products in the visuals. These details are listed below:

• Oxygen Regulator Brand: Medwelt
• Pressure Gauge Brand: Pamed
• Oxygen Cylinder Capacity: 10L
• Regulator Maximum Inlet Pressure: 200 BAR (Confirmed by the “USE NO OIL” and “MAX INLET 200BAR” markings on it.)
• Information on the Box: The box features “MEDİKAL OKSİJEN REGÜLATÖRÜ”, “Medical Oxygen Regulator”, “ISO 13485:2016” standard, and “CE 1639” mark.
• Codes on the Oxygen Cylinder: On the shoulder of the cylinder, there is “ISO 9809-1”, test pressure information starting with “PH…”, and a date stamp in the format “(D) 2021/…”. This stamp indicates that the cylinder’s manufacturing or last test year is 2021.

Accessory and Equipment Analysis

The device has the essential equipment required for oxygen therapy. The green valve on the regulator is used to open and close the oxygen flow from the cylinder. The blue adjustment knob is used to set the amount of oxygen (liters/minute) that will pass through the flow meter. The transparent humidifier chamber connected to the regulator ensures that oxygen is humidified by passing through water before reaching the patient; this is a standard practice to prevent the drying of respiratory tracts. “UPPER” and “LOWER” level lines are visible on the chamber. All connection points and valves are visually sound and complete.

Potential Risk Assessment

Based on the examination of the visuals, no existing malfunctions or critical wear, corrosion, or damage that could pose a potential fault risk have been detected in the product. The very good overall condition of the device indicates a low likelihood of a problem occurring in the near future. The products appear to be in a condition to deliver safe performance when used correctly.