Secondhand Sesan MT-016 10 Liters Steel Oxygen Cylinder with Valve
Secondhand Sesan MT-016 10 Liters Steel Oxygen Cylinder with Valve - Image 2

Sold Out

Whatsapp »
SKU: MBB311O2UA9

Secondhand Sesan MT-016 10 Liters Steel Oxygen Cylinder with Valve

, , , ,

Price: USD$ 110,00 Approx: 4.950,00 TL

Sold Out

Don't Want To Buy At This Price?

Sorry. This product has been sold. You cannot bid. Please check out other products.

Ask a Question

    Fill in the form below to send us your message. Click the button and wait. We will contact you as soon as possible.


    * We kindly ask you to write your Whatsapp number with the country code so that we can contact you quickly.

    Click once and wait.

    Payment

    No additional fees, full assurance. We provide complete financial and operational security in secondhand medical device trading. For this, we offer the "Secure Payment" service. This free service protects the rights of both parties by securing the buyer's money and the seller's product. The Secure Payment system is a standard assurance mechanism offered by Medbidding. For additional information, review the "services" page.

    There is no cash on delivery order system on the Medbidding platform. For payments to be made by credit card, the product to be purchased must comply with this payment method. You can contact us to get information about this. We would be happy to assist you.

    For payments made outside of Turkiye, you can choose bank transfer, credit card, Western Union or cryptocurrency options. Installment options are not currently available for credit cards other than Turkish banks.

    Shipping

    Standard Shipping Conditions

    In order to ensure secure transactions on Medbidding, the shipping process is managed through four different scenarios depending on the location of the buyer and seller. Free shipping is available for some categories. The terms below apply to all categories unless otherwise stated.

    Buyer and Seller in Turkiye

    • Seller → Medbidding: The seller packages the product and sends it to the Medbidding operation center. The seller is responsible for this shipping cost.
    • Medbidding → Buyer: The product, inspected by Medbidding engineers, is sent to the buyer's address. The buyer is responsible for this shipping cost.

    Buyer Outside Turkiye, Seller in Turkiye

    • Seller → Medbidding: The seller packages the product and sends it to the Medbidding operation center. The seller is responsible for this shipping cost.
    • Medbidding → Buyer: The product, inspected by Medbidding engineers, is sent to the buyer's address. The buyer is responsible for this shipping cost.

    Buyer in Turkiye, Seller Outside Turkiye

    • Seller → Medbidding: The seller packages the product and sends it to the Medbidding operation center. The seller is responsible for this shipping cost.
    • Medbidding → Buyer: The product, inspected by Medbidding engineers, is sent to the buyer's address. The buyer is responsible for this shipping cost.

    Buyer and Seller Outside Turkiye

    If there is a local operation center in the seller's country:

    • Seller → Medbidding: The seller packages the product and sends it to the Medbidding operation center. The seller is responsible for this shipping cost.
    • Medbidding → Buyer: The product, inspected by Medbidding engineers, is sent to the buyer's address. The buyer is responsible for this shipping cost.

    If there is no operation center in the seller's country:

    • Technical Inspection: Inspections are performed by our engineers via remote video call.
    • Seller → Buyer: The seller packages the product and sends it directly to the buyer's address. The seller is responsible for this shipping cost.

    Objective AI Report

    Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

    Report date: 10.03.2026

    Medical Oxygen Cylinder and Regulator Set Analysis Report

    Device Identification and Usage Areas

    The product in the images is an integrated respiratory equipment consisting of a medical oxygen cylinder, brass valve, pressure reducing regulator, flowmeter, and humidifier bottle. It is suitable for use in hospital, clinic, ambulance, and home care settings to provide oxygen support to patients experiencing respiratory difficulties.

    Brand and Model Information

    On the body of the brass valve located at the top of the cylinder, the brand Kasweld is clearly legible. No distinct brand or model inscription is found on the cylinder’s body itself or on the regulator assembly.

    Quantity Information

    In the images, there is 1 oxygen cylinder and 1 regulator set attached to this cylinder (including manometer, flowmeter, and humidifier bottle).

    General Condition and Physical Deformation

    The general condition of the equipment is very good. On the blue painted outer surface of the cylinder, no scratches, dents, rust, paint peeling, or color fading have been observed. The white mesh covering protecting the lower half of the cylinder against external impacts is intact and complete. There is no oxidation or blackening on the chrome-plated metal surfaces.

    Mechanical Components and Accessories

    The device consists entirely of mechanical and pneumatic parts; it does not contain any electronic components. The condition of the parts is listed below:

    • Valve: The brass-bodied valve and the blue star-type on/off handwheel are undamaged.
    • Regulator Body: The chrome-plated connection points and body are intact.
    • Manometer: The glass of the pressure gauge is unbroken and crack-free. The needle and dial are clearly visible.
    • Flowmeter: The transparent flow meter tube and the green gas adjustment knob are intact.
    • Humidifier Bottle: The transparent plastic-bodied humidifier bottle with a green cap is attached to the system. There is no physical damage to the bottle, and it is empty. A patient hose connection outlet is present at the tip of the cap.

    Label and Stamp Information

    The inscriptions, warnings, and metal stamps on the product are as follows:

    • Cylinder Body Stamps: On the shoulder of the cylinder, the inscriptions 870059, UT, 5L, PW150, PH250, ISO9809-3, K5, and P08 are embossed on the metal. This information indicates the cylinder’s 5-liter volume, working and test pressure values, and manufacturing standards.
    • Regulator Warning Label: A red circular label on the regulator body displays the warning USE NO OIL / UNDER 14700Kpa / 150 Kg/cm².
    • Manometer Dial: The inscriptions USE NO OIL and PRESSURE GAUGE are present on the gauge. The dial features pressure level zones separated by green, yellow, and red colors.
    • Flowmeter Tube: The transparent tube features numbers and lines from 0 to 15, indicating oxygen flow rate in liters/minute.
    • Adjustment Knob: The green flow adjustment knob has OPEN and SHUT inscriptions and arrow indicators for guidance.

    Dimensions and Compatibility

    From the stamps on the cylinder, it is understood to have a 5-liter (5L) capacity. The regulator outlet and humidifier bottle tip are compatible with standard medical oxygen cannulas and masks.

    Originality

    Considering the quality of the materials used, the industrial stamps on the metal, and the craftsmanship of the manometer and regulator, the product appears to be manufactured according to original medical standards.

    Potential Malfunction Risk

    In the images, there are no broken parts, cracks, rust, or physical deformations that would prevent the device from operating. The equipment’s condition is good, and based on visual data, no significant malfunction risk has been identified.

    Similar Products