Secondhand Söhngen 15L/min Medical Gas Cylinder With Valve Regulator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 05.09.2025

Söhngen Oxygen Regulator Analysis Report

Product Description and Intended Use

The product shown in the images is a medical oxygen regulator designed to reduce the pressure of gas from high-pressure oxygen cylinders and adjust the flow rate. The device features two analog manometers (gauges), one indicating pressure (bar) and the other indicating flow rate (l/min). Such regulators are used in hospitals, ambulances, and home care settings to administer oxygen therapy to patients.

Brand and Model Information

The Söhngen brand is clearly legible on the dial of both gauges in the images. The product’s brand has been identified as Söhngen. No model information is visible in the images.

Quantity and Content Information

One Söhngen brand oxygen regulator is present in the images. No accessories, boxes, or additional parts other than the device are visible.

General Condition and Assessment

The product generally appears to be in very good condition. No significant signs of use, dirt, or wear were observed. The clean and undamaged metal and plastic parts suggest that the product may be new or very lightly used. The gauge glasses are transparent and legible. The needles on both gauges are at the zero (0) position, indicating that no pressurized gas is connected to the device.

Physical and Mechanical Analysis

A detailed examination of the device’s physical and mechanical components revealed no abnormalities.

• Casing and Surface: No deformations such as scratches, dents, cracks, or discoloration are present on the device’s metal body and plastic parts.
• Mechanical Parts: The gray rotary valve on the side used for flow adjustment and the connection nut at the bottom are physically in good condition. The outlet tip used for hose connection also appears sturdy.

Technical Gauge Information

The technical information on the two gauges located on the device is listed below:

• Upper Gauge (Cylinder Pressure): Measures pressure between 0 and 315 bar. Values above 200 bar are marked in red. This gauge includes the indications “OXYGEN” and “bar”.
• Lower Gauge (Flow Rate): Measures oxygen flow rate between 0 and 15 l/min (liters/minute). This gauge includes the technical information “OXYGEN”, “l/min”, and “ORIFICE 0.85mm”.

Other label information such as the device’s serial number, lot number, or REF code is not legible in the images.

Potential Failure Risk Assessment

Based on the examination of the images, no significant signs of wear such as rust, corrosion, cracks, or damage to cables, which could pose a potential failure risk, were observed on the device. The product’s current physical condition suggests a good potential for safe use.