Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 07.04.2026
Report code: 1775544198
Totoku ME181L Monochrome LCD Monitor Analysis Report
Device Identification and Area of Use
The product shown in the images is a monochrome (black and white) LCD monitor designed for use in medical systems. The “Medical Electrical Equipment” inscription and UL certification on the back panel label indicate that the device is suitable for use in medical environments. It can be integrated into radiology, ultrasound, or similar medical imaging devices, or used as an external display.
Brand and Model Information
- Brand: Totoku
- Model: ME181L /r
- Model Number: MDL1809A
Quantity Information and Accessories
The images show 1 monitor. No power adapter, video transmission cable, desktop stand, or external accessory belonging to the device is visible in the images.
General Condition and Physical State
The device is in used condition. Its general condition appears good. There are faint, dark-colored stain marks on the lower left part of the front bezel. No cracks, breaks, dents, or deep scratches have been observed on the screen surface or the plastic casing. The ventilation holes on the back panel are open, and the mounting slots are sturdy.
Label and Technical Information
The information on the labels located on the back panel of the device is listed below:
- Manufacturing Date: September 2007 (Sep 2007)
- Serial Number: L597004003 N
- Power Consumption: 12V — 4.5A
- Place of Manufacture: Taiwan (Made in TAIWAN)
- Certifications: CE, FC, VCCI, MIC, UL
- QC Number: DTH350E0633 (Barcoded label)
- Additional Barcode: Sub-label numbered 2939 2967
Mechanical and Mounting Features
The back panel features keyhole-shaped slots for wall or stand mounting. A standard VESA mounting area is present in the middle. The warning label in this area states that the screws to be used should be M4 x 0.7 pitch x 10mm-long and the plate thickness should be between 2.0mm and 2.6mm.
Originality and Documentation
The print quality of the labels on the device’s back panel, the international certification logos, and the holographic security/quality control label with “Quest” written on the lower left corner indicate that the device is original. No invoice or warranty document is present in the images. Considering the manufacturing year, it is assessed that the manufacturer’s warranty is no longer valid.
Potential Malfunction Risk
No physical damage, rust, or broken parts that would prevent the device from operating have been detected in the images. The external condition of the device is entirely sound. Since the screen is in the off position, there is no visual data regarding image quality or dead pixel status.
