Secondhand GE Signa 8Ch 2415366 Body Array MRI Coil

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 04.09.2025

General Electric MR Coil System Analysis Report

Product Description and Brand Identification

The product shown in the images is a General Electric brand MR (Magnetic Resonance) coil system used in medical imaging processes. The “GE” logo of the brand is clearly visible on the device. This coil system is designed to acquire signals from specific body regions during MR scans. The system is presented with a foldable gray positioning table, where multiple coil elements are integrated.

Quantity Information

One main product set is present in the images. This set consists of the following components:

• 1 foldable, segmented, gray-colored positioning table.
• Multi-piece white-colored MR coils of various sizes, integrated into the positioning table and connected to each other with cables.

General Condition and Physical Assessment

The general condition of the product has been assessed as used. There are signs of heavy use on the device. The following details were identified within the scope of the physical assessment:

• Plastic Components: A noticeable yellowing and discoloration were observed on the white plastic surfaces of the coils. While there are no serious cracks or fractures on the surfaces, minor scratches and stains are present in some areas.
• Positioning Table: The surface of the gray-colored positioning table shows shine and signs of use. No tears or detachments are visible.
• Connection Straps: The white-colored hook-and-loop straps used to secure the coils show dirtiness and discoloration.

Electronic and Mechanical Component Analysis

Upon examination of the electronic and mechanical components of the device, the following conditions were identified:

• Cables: There is general dirtiness on the outer surface of the cables connecting the coils to each other and to the main unit. The cable entry point of the main connection connector appears to be wrapped with white tape. This situation suggests that a repair might have been performed in this area previously, or a reinforcement was applied to protect the cable.
• Connector: Upon examining the internal structure of the main connection connector, the pins appear clean, proper, and complete. There is no deformation in the connector housing.
• Mechanical Parts: The folding mechanism of the positioning table and the securing straps appear functional. No visible mechanical malfunction or missing parts have been detected.

Label and Code Information

The labels on the product were examined, but specific technical information such as serial number, REF code, or lot number could not be read due to the resolution and angle of the photographs.

Potential Risk Assessment

The overall condition of the product is considered acceptable for a used device. However, the taped cable leading to the main connector is noteworthy. This tape could indicate a repair or a reinforcement of a weak point, potentially creating a future risk point for contact issues or signal transmission problems. Other than this, no serious damage or malfunction risk compromising the integrity of the device has been observed.