Secondhand Philips Synergy Sense 4522-132-14001 Head MRI Coil

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 12.08.2025

Philips MRI Coil Analysis Report

Device Description and Intended Use

The product shown in the images is a coil unit belonging to a magnetic resonance imaging (MRI) system. Such medical devices are used to obtain high-resolution images from specific areas of the body. The design of the product allows it to be positioned on or around the patient’s body for scanning. Along with the main unit, there is an additional, smaller coil component, presumably used for more localized imaging.

Brand Information

The Philips brand logo is clearly visible on the main body of the device. Therefore, it is concluded that the product is an original Philips component. The model could not be identified as there is no legible model information in the images.

Quantity and Contents

The items shown in the images are listed below:

• 1 main coil unit
• 1 auxiliary coil component

General State and Condition

The overall condition of the device is assessed as used. There are no significant cracks or fractures on the plastic components, and it has a generally clean appearance. The wrapping of some cable sections with white tape suggests that the device has been previously used and has likely undergone some form of intervention, possibly for cable management or protection. The light-colored cushion inside, while wrinkled, does not appear to be torn or damaged.

Physical Assessment

Upon physical inspection of the product, no significant deformation was observed, aside from minimal superficial scratches on the plastic surfaces consistent with use. There is slight yellowing on some of the white plastic parts and cables; this may be a natural discoloration that occurs over time. There is no heavy accumulation of dirt or dust on the device.

Technical and Mechanical Assessment

The mechanical parts of the device, such as the latch and connection points, appear visually intact. Upon inspecting the interior of the electrical connector, the pins are observed to be complete and properly aligned. The connector socket is clean and shows no signs of oxidation or damage. Specific points on the outer sheathing of the integrated cables are wrapped with white tape.

Potential Risk Assessment

There is no direct evidence in the images to indicate a functional malfunction of the device. However, the white tape wrapped around the cables is notable. This tape might have been used to conceal wear or fraying on the cable sheathing. Such conditions on the cables carry a potential risk of causing signal transmission problems in the future. Nevertheless, as the main casing, connectors, and mechanical parts of the device are visually intact and in good condition, no significant risk of potential failure is observed.