Description
Report date: 12.08.2025
Philips Brand MRI Surface Coil Analysis Report
Overview and Product Description
The images show a device and its associated cables, which appear to be used in medical imaging procedures. The product consists of two ring-shaped padded coils, flexible cables connecting these coils, a main body, and a connector used for system connection. Such coils are typically used in Magnetic Resonance Imaging (MRI) systems to acquire high-resolution signals from specific areas of the body. The product is a single unit and has been identified as a total of 1 piece.
Brand and Authenticity
The Philips brand is clearly legible on the main body of the device. The quality of the logo and the overall workmanship of the device suggest that the product is original. As there are no texts or labels indicating model information or product series in the images, model identification could not be performed.
Physical Condition and Deformation
The overall condition of the product is assessed as used. Its physical condition is detailed below:
- General Condition: The device is clearly used, which is particularly evident from the discoloration of the cables. However, it appears to maintain its overall integrity.
- Casing and Plastic Components: No significant cracks, fractures, or deep scratches were observed on the white plastic main body where the Philips logo is located, or on the connector part. The surfaces appear clean.
- Cables: There is significant yellowing and fading on the beige-colored cables of the device. This indicates that the material has worn out over time or due to usage conditions. No structural damage such as crushing or breakage was detected in the cables.
- Padded Coils: There are no tears, rips, or holes on the fabric or coating surfaces of the ring-shaped, beige-colored padded coils. The stitching appears to be intact. There may be slight soiling and discoloration on their surfaces.
Technical Details and Accessories
No additional accessories (e.g., carrying case, user manual) other than the device itself are present in the images. The technical specifications of the device, based on visual inspection, are as follows:
- Connector: At the end of the device, there is a large, multi-pin connector for connection to the MRI system. A gray locking latch is located on the connector. Although the condition of the pins cannot be clearly determined from the visuals, the connector appears to be physically intact.
- Label Information: No label containing information such as a serial number, REF code, lot number, or year of manufacture is visible on the product.
- Battery: This type of medical coil is externally powered by the MRI machine and therefore does not have an internal battery.
Potential Risk Assessment
No conditions directly indicating a malfunction, such as broken parts, error messages, or exposed wires, have been observed on the product. However, the advanced yellowing and discoloration of the cables are indicators that the product has been in use for a long time. While this is currently only a cosmetic issue, it should be noted that the flexibility and insulation properties of the cable may diminish over time. However, based on the available images, the mechanical and structural integrity of the device can be said to be intact.
