Secondhand BTM Life BTM-1003 Compressor Nebulizer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 24.01.2026

BTM Life Compressor Nebulizer Device Analysis Report

Device Identification, Brand and Model Information

As a result of a detailed visual inspection, the device subject to analysis has been identified as a compressor nebulizer, which is a medical respiratory support equipment. The brand logo located on the main body of the device is clear and legible.

• Brand: BTM Life
• Product Type: Compressor Nebulizer (Steam Machine)
• Model: No specific model number (e.g., BN-100, etc.) is written on the front surface of the device. However, the visual design confirms that the device is a standard type of home-use compressor nebulizer.

Originality and General Condition

Upon examining the print quality of the “BTM Life” logo on the device, the plastic molding lines of the casing, and the overall assembly quality, the product is assessed to be an original BTM Life product. No deformation or low craftsmanship that would suggest a counterfeit or substandard production has been observed.

General Condition: The product appears to be in extremely clean condition. There is no yellowing on its plastic casing, and its color retains its original whiteness. The transparency and brightness of the clear blue cover and the condition of the accessories (hose set) indicate that the device has either never been used (new) or has been used very sparingly and stored with care. It is in the condition of a display or showroom item.

Areas of Use

This device is designed to convert liquid medications into vapor using pressurized air, allowing the patient to inhale them through the respiratory tract. It is suitable for the following areas of use:

• Treatment of respiratory diseases such as asthma, COPD, and bronchitis.
• Administration of respiratory medications to infant, child, and adult patients.
• Home care services and clinical environments.

Quantity Information

The total product and accessory content shown in the visuals is as follows:

• 1 Unit Nebulizer Main Unit (Motor part)
• 1 Unit Air Hose (Green transparent color)
• 1 Unit Medication Cup (Nebulizer Cup – including parts attached to the end of the hose)

Physical Deformation and Cosmetic Inspection

The product’s casing has been visually scanned, and the following observations have been made:

• Body: There are no cracks, breaks, deep scratches, or color fading on the white plastic main body.
• Cover: The clear blue protective cover on the front is intact. The second visual shows that the cover mechanism operates smoothly and can be opened upwards. There might be very superficial hairline marks on the cover due to use or storage, but there are no noticeable defects.
• Cleanliness: No accumulated dust or dirt is observed in the air inlet grilles or around the buttons. The device is hygienically clean.

Mechanical and Electronic Component Analysis

• On/Off Switch: In the second visual, a red “On/Off” (I/0) switch is seen beneath the accessory compartment. The switch appears physically intact.
• Air Outlet Port: Immediately next to the switch, the air outlet nozzle where the hose connects is located. It is not broken or dented.
• Filter Slot: To the right of the air outlet, a white, round cover is visible. This section typically houses the air filter, and its cover is in place and complete.
• Ventilation: Grilles (holes) are present on both sides of the device, which provide cooling for the motor. These grilles are open and unobstructed.

Condition of Accessories

The components located in the device’s accessory compartment have been examined:

• Air Hose: The green-colored, medical-grade air hose is neatly coiled. No signs of kinking, breakage, or crushing (whitening) are observed on the hose. This confirms that the hose is new or has been used very little.
• Medication Chamber (Nebulizer Kit): The transparent parts visible inside the hose form the medication chamber. The parts appear complete and assembled.
• Missing Part Note: A direct adult or child face mask could not be clearly identified in the visuals. The chamber set is visible, but the mask might be hidden under the hose or not included.

Label and Technical Information

Since there is no view showing the bottom or back of the device in the visuals, the “Product Rating” label containing the Serial Number (SN), Lot Number, year of manufacture, or technical power values cannot be seen. Therefore, definitive data regarding the year of manufacture and technical electrical values cannot be provided.

Current Malfunction and Potential Risk Assessment

Current Malfunction: No physical evidence indicating the device is faulty (e.g., broken casing, burn marks, disconnected cables, etc.) is present in the visuals.

Potential Risk Analysis:

• Since the device’s condition is assessed as “New” or “Very Close to New”, no immediate mechanical risk is foreseen.
• For hygienic reasons alone, respiratory device accessories (hose and medication chamber) are personal. Replacing this set with a new one is a standard procedure for second-hand use.

Conclusion: The BTM Life brand nebulizer is a cosmetically flawless device with complete and undamaged mechanical parts. It is presented with its original accessory set, and according to visual evidence, there are no issues that would impede its use.