Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 15.01.2026
Üzümcü OM-3F Operating Table Analysis Report
Device Identification
The product examined in the visuals is a professional surgical operating table with a multi-part bed surface and electromechanical movement capability, used for patient positioning in medical operations. The product consists of a base, column (body), table top (head, back, seat, and foot sections), and accessories.
Brand and Model
The labeling and logo prints located on the device’s body (on the column) in the visuals have been thoroughly examined. The üzümcü brand logo, clearly written in black font on the stainless steel body, and the OM-3F model designation immediately below it, have been identified. This information has been confirmed in visuals taken from different angles of the device (e.g., on the side surface of the body). The brand and model information is 100% readable in the visuals.
Originality
The font of the brand print on the product’s body, the stainless steel craftsmanship, the design language, and the harmony of the materials used (upholstery and metal parts) indicate that the product is an original Üzümcü production. There is no visual indication of aftermarket or counterfeit production (e.g., incorrect logo, low-quality labeling).
Areas of Use
This device is designed for use in hospital operating rooms and surgical intervention rooms. It is used to position patients appropriately (horizontal, sitting, tilted, etc.) during operations in general surgery, orthopedics, gynecology, and other medical branches.
Quantity Information
The visuals show 1 main device (operating table), a cushion set placed on the table (a total of 5 pieces, including head, back, seat, and two foot supports), 2 arm supports (armrests), and 1 hand control unit.
General Condition
Based on visual inspection, the device is a used product. However, its overall condition appears clean and well-maintained. The shine on the metal surfaces and the integrity of the upholstery suggest that the device is not in a scrapped condition but rather has been actively used and stored.
Physical Deformation
No deep scratches, large dents, or signs of corrosion (rusting) are visible on the stainless steel body. Although slight stretching marks due to use might be present on the black cushions, no tears, unraveling, or deep cracks have been observed on the cushion surfaces in the visuals. Slight signs of use may be visible on the plastic/foam parts of the armrests, but no functional deformation is noticeable.
Mechanical Components
The table’s movable joint points, piston housings, accessory rails, and adjustment levers appear to be in place and intact. The hydraulic/mechanical support pistons beneath the table top are present in the visuals, and no bending or breakage is observed. The detachable structure of the foot (leg) sections and their manual adjustment mechanisms visually maintain their integrity.
Electronic Components
The hand control unit, which controls the device, is present and connected to the body with its coiled cable. No visual breakage or deformation (crushing, fraying) has been detected on the cable. Since there is no active light or screen display in the visuals indicating that the device is operational, functional testing cannot be performed visually, but physical integrity is present.
Accessories
The following standard equipment has been observed on the device:
- Hand Control Unit: A coiled-cable control unit that manages movement functions.
- Armrests: 2 black cushioned arm supports mounted on both sides of the table, used to secure the patient’s arms.
- Cushion Set: Bed pads believed to be made of black polyurethane material, perfectly fitting the metal surface of the table.
Battery Status
Since the device’s internal battery is located within the body, no comment can be made regarding battery presence or health based on visuals. No battery leakage or associated outward corrosion marks are observed.
Label Information
Apart from the main brand/model label on the body, detailed serial number or manufacturing year labels readable from the visuals cannot be clearly discerned. Only the following information is clear:
- Brand: üzümcü
- Model: OM-3F
Dimensions and Compatibility
The product is of standard dimensions designed for adult patients. Thanks to its modular structure, it can adapt to various surgical positions (e.g., Trendelenburg).
Existing Faults
There is no concrete evidence in the visuals to indicate that the device is faulty (e.g., broken parts, dangling cables, burn marks, missing essential components).
Potential Fault Risk
In the visual inspection, the mechanical and structural integrity of the device appears sound. As no significant rusting, cable breakage, or upholstery damage has been observed, no prominent risk factor originating from the visuals has been identified, apart from routine maintenance requirements. The product appears to be in good condition.
