Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 26.03.2026
Report code: 1774549569
Plus Med Puro Oxygen Concentrator Analysis Report
Device Identification and Area of Use
The device shown in the images is an oxygen concentrator manufactured for patients requiring respiratory support. The device is suitable for use in home care processes, clinics, and hospitals to provide oxygen to patients by separating it from ambient air. Thanks to its humidifier jar outlet, it operates compatibly with standard oxygen cannulas and masks.
Brand and Model Information
Based on the logos and texts located on the device’s front panel, its brand has been identified as Plus Med, and its model as Puro. The panel also features the manufacturer’s information: Manufactured by EMGTECH.
General Condition and State
The device is in used condition. In one of the images, the device is seen plugged in and the green power light on the control panel is illuminated. This indicates that the device is receiving power. The overall condition of the device maintains its integrity, apart from cosmetic flaws.
Physical and Mechanical Deformation Analysis
The device’s outer plastic casing has noticeable scratches, scuff marks, and superficial dirt, especially on the side and front lower parts. No breaks, cracks, or missing parts have been observed on the casing. The upper carrying handle and the four wheels at the bottom, which facilitate the device’s transport, appear intact. The on/off switch and the flowmeter adjustment valve on the front panel are physically undamaged.
Electronic Components and Display Analysis
The device’s front panel does not feature a digital display. Instead, a mechanical hour meter is present. The total operating time of the device is read as 01780 Hours on the meter. There are two indicator lights on the panel. The Power light is illuminated in green. The Service Required warning light is not illuminated.
Accessory and Part Status
The equipment identified in the images includes the following:
- 1 main device body
- 1 humidifier water jar attached to the device
- 1 black power cable
External consumables such as nasal cannulas or oxygen masks, which would connect the device to the patient, are not present in the images. The front surface of the device features a flowmeter capable of measuring between 0 and 10 liters.
Label and Instruction Information
On the upper part of the device, just behind the control panel, there is a label containing English usage instructions. The items on the label are as follows:
- 1. Read Patient manual
- 2. Attach oxygen accessories to oxygen outlet
- 3. Press power switch to ON position
- 4. Set flowmeter to prescribed flow rate
- 5. Air intake filter must be replaced as needed
No specific barcode or type label indicating the serial number, lot number, or year of manufacture could be identified on the device in the images.
Originality and Potential Risk Assessment
Upon examining the print quality, part joints, and standard medical equipment used on the device, the product is assessed to be original. The images do not show any broken parts, disconnected cables, or burnt fault indicator lights that would impede the device’s operation. The scratches on the outer casing are purely cosmetic, and the device’s overall condition is good, posing no serious potential risk of malfunction observable from the outside.
