Secondhand Respirox Healthbox 3L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 20.08.2025

Health Box RespiroX Oxygen Concentrator Analysis Report

Product Description and Intended Use

The device shown in the visuals is a Health Box RespiroX Oxygen Concentrator. Such medical devices are used to produce high-purity oxygen by separating nitrogen from the ambient air and to deliver it to patients requiring respiratory support. The product in the visuals is designed as a model suitable for home or clinical use.

Quantity and Content Information

In total, the following parts were identified in the visuals:

• 1 Health Box RespiroX Oxygen Concentrator
• 1 transparent water humidification chamber (attached to the device)
• 1 power cable (not connected to the device, visible on the floor)

Overall Condition

The overall condition of the device is assessed as used. There is a noticeable yellowing on its plastic casing, likely caused by time or exposure to sunlight. While this affects the aesthetic appearance of the device, it does not indicate a functional problem. No serious damage, other than minor scratches and light stains here and there on its surface, has been observed. Its general condition suggests a device with age-related cosmetic imperfections, but with its integrity preserved.

Physical Assessment

Upon detailed examination of the device’s outer casing, no break, crack, or dent has been detected. Small scuff marks and light dirt are visible around the oxygen outlet port (Oxygen Outlet) on the left side and on the top surface. The transparent cover where the humidification chamber is located and the chamber itself are intact. The overall structure of the device is stable and integral.

Mechanical and Electronic Components

All mechanical and electronic components located on the device’s front panel have been visually inspected.

• Control Panel: The Power button, timer setting keys, and LCD screen are physically in place, and no damage is visible.
• LCD Screen: The functionality of the screen could not be tested as the device was not operational. However, there are no cracks or stains on the screen. Functional information texts such as “COUNTS (hours)” (operating hours) and “TIMING (minutes)” (timing) are legible on the screen.
• Flow Meter: The rotary knob used to adjust oxygen flow rate and the transparent tube showing the flow rate in liters/minute (L/min) are intact. The level indicators from 0 to 5 on the gauge are clearly legible.
• Oxygen Outlet: There is no deformation on the oxygen outlet port.

Accessories and Connections

A European-type (two-pin) power plug is visible on the floor next to the device in the image. The device’s humidification chamber is correctly mounted on the device, and there is no water inside the chamber. External accessories such as cannulas, masks, or connecting hoses are not present in the visuals.

Potential Malfunction Risk and Assessment

During the examination based on the visuals, no obvious malfunction (broken part, burn marks, severed cable) that would prevent the device from operating was detected. The yellowing and small scratches on the device’s outer casing are purely cosmetic imperfections. Mechanical components such as buttons, the flow meter, and connection ports are in good physical condition. Based on these observations, it can be stated that the device’s current condition does not pose a serious risk that would hinder its operation. However, as with any used medical device, it is recommended that its functionality and performance be checked by a qualified technician.