Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 23.03.2026
Report code: 1774250240
Respirox Health Box Oxygen Concentrator Analysis Report
Device Identification and Area of Use
The product in the image is an oxygen concentrator used to provide medical oxygen to patients in cases of respiratory failure or when oxygen therapy is required. It is suitable for use by home care patients and in clinical environments.
Brand and Model Information
According to the inscriptions on the front casing of the device, the brand and model information is stated below.
- Brand Respirox
- Model Health Box
General Condition and Physical State
The device is in used condition. Significant wear and discoloration are observed on its outer casing.
- There is intense yellowing on the plastic casing of the device. This condition typically results from prolonged use, heat, or exposure to sunlight.
- On the left side of the front panel, around the oxygen outlet jack and on its lower parts, there are noticeable scratches, scuff marks, and dirt accumulation.
- Dulling and dust accumulation are observed on the transparent plastic cover of the central compartment where the humidifier bottle is placed.
- Surface dirt is present at the casing joints and in recessed areas.
Mechanical and Electronic Components
The control and indicator units located on the front panel of the device have been examined visually.
- Display A digital LCD screen is located at the top. Inscriptions indicating that the screen shows operating hours (COUNTS hours) and a timer (TIMING minutes) are present on it. Since the device was off, the screen content and usage duration could not be analyzed.
- Control Buttons To the right of the screen, there are plus and minus buttons used for timer adjustment, along with a black main power switch (POWER). No physical breakage or deformation is visible on the buttons.
- Flow Meter On the right side, there is a rotary knob for adjusting the oxygen flow rate and a graduated transparent tube (FLOW METER). The indicator ball inside the tube rests at the bottom.
- Oxygen Outlet On the left side, the standard oxygen outlet jack (OXYGEN OUTLET) is located. No physical damage or blockage is visible on the jack.
Accessory and Missing Parts Status
Some essential accessories required for the device’s operation and oxygen delivery to the patient are not present in the image.
- The humidifier water bottle, which should be located in the central compartment, is missing.
- A nasal cannula or oxygen mask, which provides oxygen delivery to the patient, is not present in the image.
- The device’s power cable is not visible in the image.
A total of 1 main device is present in the image.
Label and Technical Information
There is no manufacturer’s label or information plate on the front surface of the device indicating the serial number, year of manufacture, lot number, or REF code. Therefore, detailed technical specifications and the year of manufacture could not be confirmed.
Potential Malfunction Risk
The intense yellowing and wear marks on the device’s outer casing indicate that the device has been in use for a long time. This condition may have led to brittleness in the plastic components. The absence of the humidifier bottle means that the device, in its current state, cannot be used for humidified oxygen therapy. The extensive signs of use on the exterior surface also suggest that internal mechanical parts and filters may require maintenance.
