Secondhand Airsep Visionaire 5 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 04.08.2025

AirSep VisionAire 5 Oxygen Concentrator Analysis Report

Overview and Device Description

The device shown in the images is one AirSep VisionAire 5 model oxygen concentrator. This device is a stationary medical device used to produce high-concentration oxygen by separating nitrogen from the ambient air. It is specifically designed for patients who require oxygen therapy at home. The device’s general color is gray, and its wheeled structure allows for easy movement.

Brand and Model

In the images, the writings “AirSep” and “VisionAire 5” are clearly visible on the front panel and the rear label of the device. Based on this information, it has been definitively identified that the brand of the device is AirSep and the model is VisionAire 5.

Quantity Information

The images show one AirSep VisionAire 5 oxygen concentrator. Apart from an integrated power cord, no other accessories (humidifier, cannula, etc.) are visible.

General Status and Condition

The overall condition of the device appears to be good and lightly used. There is no significant deformation, color fading, or dirt on the casing. The writings on the front panel and the rear label are legible. The wheels appear to be sturdy and functional. The impression is that the device is clean and well-maintained.

Physical and Mechanical Deformation

The device’s plastic casing is generally in good condition. No significant scratches, dents, or cracks were observed on the sides and back. The flowmeter and control buttons on the front panel appear to be intact. The flowmeter adjustment knob is in place and shows no signs of physical damage. The carrying handle and power cord wrap section on the top of the device also appear to be without issues.

Electronic and Mechanical Components

• Control Panel: Components such as the power button, flow adjustment knob, and digital hour meter are present. No cracks or wear are visible on the buttons.
• Power Cord: The black power cord and plug attached to the device are in good condition. There are no crushes, cuts, or deformations on the cord.
• Wheels: The four wheels located at the bottom of the device provide mobility and are in good condition.
• Hour Meter: On the front panel, just above the power button, there is a small digital display (hour meter). This screen shows the total operating time of the device.

Label Information and Technical Details

The manufacturer’s label on the back of the device contains various technical information. This information is as follows:

• Model: VisionAire V
• Serial Number (S/N): GPB01121142867
• REF Code: AS098-4
• Other Codes: MTR#AS098B90
• Electrical Specifications: 220-240V ~ 50Hz 1.5A 290W
• Protection Class: IP21 (Protected against vertically falling water drops)

This label also indicates that the device has CE and other conformity markings.

Area of Use and Functionality

The AirSep VisionAire 5 is a stationary oxygen concentrator that provides a continuous flow of oxygen up to 5 liters/minute. It is known for its low power consumption (290W) and quiet operation (approximately 40-45 dB). The device stands out for its maintenance-free design. It is used in home or clinical settings to provide supplemental oxygen to patients with conditions such as respiratory failure. There is a compartment on the back panel of the device for attaching a humidifier bottle, but the humidifier bottle is not present in the image.

Potential Fault Risk

No broken parts, error messages, or severe wear and tear (rust, crushed cables, etc.) belonging to the device were observed in the images. The device’s current condition appears good, and based on the images, no obvious potential fault risk has been identified.