Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 30.03.2026
Report code: 1774863483
AirSep VisionAire 5 Oxygen Concentrator Analysis Report
Device Identification and Application Area
The product in the images is an oxygen concentrator used for patients requiring respiratory support. The phrases Oxygen Concentrator, the O2 symbol, and the RX ONLY (for prescription use only) warning on the device confirm this. The device is designed to produce oxygen from ambient air and deliver it to the patient.
Brand and Model Information
According to the inscriptions on the device’s front panel and top label, its brand has been identified as AirSep, and its model as VisionAire 5. Based on the label information, the manufacturer is stated as CAIRE Inc.
Authenticity Assessment
Considering the print quality of the labels on the device, the serial number, UDI barcode, CE certification mark (CE 0459), and casing craftsmanship, the product is assessed to be original.
Quantity Information
The images show a total of 4 pieces of equipment: 1 main device, 1 humidifier water bottle, 1 power cable, and 1 transparent oxygen tube (cannula).
Label and Technical Information
The following data has been read from the information label located on the upper part of the device.
- Serial Number (SN): GPB0122060283
- REF Code: AS098-5
- UDI Code: M766AS09850
- Manufacturing Date: 2022-02-10
- Power Requirement: 230V ~ 50Hz, 1.5A
- Weight (Mass): 13.6 kg
- Protection Class: IP21
- Place of Manufacture: China (Made in China)
Physical Condition and State
The device is in used condition. There is general dust accumulation on the body. Dirt deposits have been observed particularly in the carrying handle recess and around the oxygen outlet port. A transparent tape or stretch film is wrapped around the body in the lower-middle part of the device. Significant scratches and dullness are present on the transparent plastic cover protecting the section where the power button and digital display are located.
Mechanical and Electronic Components
On the front face of the device, there is a mechanical flowmeter (debimetre) capable of measuring between 1 and 5 liters/minute (LPM) and an adjustment knob. The adjustment knob appears physically intact. The oxygen outlet port (black tip) is unbroken and ready for use. In the upper right part of the device, there is an on/off (I/O) switch, and immediately above it, a digital display showing the device’s operating hours. Since the device is off, no data or error codes are visible on the screen. Wheels are present on the bottom of the device, providing mobility.
Accessories and Connections
A humidifier water bottle is secured to the upper part of the device with a black hook-and-loop strap. A short green-tipped tube connects from the water bottle’s lid to the device’s oxygen outlet port. Additionally, the long transparent oxygen tube leading to the patient and the device’s black mains power cable are left loosely on the device. No visually detectable breaks are present in the cables or tubes.
Potential Malfunction Risk
Although the overall integrity of the device is preserved, the tape wrapped around the lower part of the body might be concealing a potential crack in the casing or could have been used to hold parts together. The power cable and oxygen tube being left in a disorganized and coiled manner could lead to internal cable breaks or blockages in the tube in the long term. Other than this, no visually critical breaks or missing parts have been detected on the device.
