Secondhand Hikoneb Oxybreath Mini 5 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 23.01.2026

Hikoneb OxyBreath Mini Oxygen Concentrator Analysis Report

Device Identification, Brand and Model Information

As a result of the detailed visual inspection, the analyzed device has been definitively identified as a medical oxygen concentrator. The brand and model indications on the front face of the device are clear and legible:

• Brand: Hikoneb
• Model: OxyBreath Mini
• Device Type: Oxygen Concentrator

On the device labels, the brand logo is clearly stated as “hikoneb” and the model name as “OxyBreath Mini”. In light of this information, the product’s identification has been definitively made.

Technical Specifications and Label Analysis

The following technical data can be clearly read from the information label positioned vertically on the front right side of the device:

• Oxygen Capacity: Has an oxygen flow rate capacity of 5 Liters/Minute.
• Oxygen Purity: Stated to provide oxygen at %93 purity (with a ±3 deviation).
• Power Consumption: The energy consumption value is indicated with the phrase “265 Watt/Hour” and emphasized as “Most Economical”.
• Weight: The phrase “Lightest” is included with a net weight of “15.25 Kilograms”.
• Raw Material Information: “European Manufactured Zeolite” is declared on the label as being used.

Areas of Use

Hikoneb OxyBreath Mini is a medical device used to separate oxygen from ambient air and provide high-concentration oxygen support to patients. It is designed for long-term oxygen therapy at home or in clinical settings, primarily for the treatment of patients suffering from COPD (Chronic Obstructive Pulmonary Disease), asthma, and respiratory failure. The device in the image is a main unit.

Available Accessories and Missing Parts Status

The product in the image consists of 1 unit of the main device. The conditions identified as a result of the inspection are as follows:

• Humidifier Bottle: The slot where the humidifier bottle should be attached in the middle section of the device is empty. The water container (bottle) required for the device to be ready for use is not present in the image, which is a deficiency.
• Cable and Cannula: Accessories such as the power cable, nasal cannula, or mask belonging to the device are not visible in the image.
• Metal Outlet Tip: A threaded oxygen outlet point made of yellow brass material is present above the humidifier slot.

Control Panel and Screen Analysis

The control panel is located on the left front face of the device:

• Screen: An LCD information screen is present on the device. Since the device is turned off, no operating hours or warning messages are displayed on the screen.
• Warning Lights (Oxygen Monitor): LED indicators for “High Purity”, “Purity Drop”, and “Service Required” are present.
• Power Switch: A green “I/0” (On/Off) switch is located at the top left corner of the device.
• Flowmeter: On the right side, there is a manually adjustable glass tube indicator (flowmeter) showing a range of 0 to 5 L/min, with a black adjustment knob above it. The glass tube appears intact.

General Condition, Cosmetics, and Physical Deformation

The general cosmetic condition of the product is evaluated as “used”:

• Case Cleanliness: There are localized dust accumulation and light surface dirt on the white plastic outer casing due to use. However, no deep cracks or breaks have been detected.
• Structural Integrity: The device’s casing is intact; no disintegration or fragmentation is visible. Some of the wheels at the bottom are within the visual angle and appear to be present.
• Warning Labels: The warnings “Use No Oil”, “No Smoking”, “No Open Flame” on the panel are legible. Warnings against opening the casing due to the risk of electric shock are present on the lower left side.

Potential Malfunction Risk and Evaluation

During the visual inspection, no major damage (such as cracks, broken cables, etc.) that would create an operational impediment was observed on the device’s outer casing or mechanical buttons (flowmeter knob, power switch). The absence of the humidifier bottle indicates that the product is not immediately ready for use; this part must be obtained separately. Since the device’s LCD screen is off, the total operating hours (a critical data point for compressor lifespan) or whether the “Service Required” light is on cannot be determined. Its physical condition is medium-to-good, presenting the appearance of a standard second-hand medical device.