Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 06.04.2026
Report code: 1775458065
Elmaslar OXYTIME Q5 Oxygen Concentrator Analysis Report
Device Identification and Area of Use
The product in the images is an oxygen concentrator. The device is used to produce oxygen from ambient air and deliver it to patients who require respiratory support. Based on the capacity of its flowmeter, it is suitable for use in home care or clinical environments.
Brand and Model Information
The brand and model have been identified based on the printed logos and text located on the front body of the device.
- Brand: Elmaslar
- Model: OXYTIME Q5
Considering the device’s casing structure, logo print quality, and the manufacturer’s label on the rear section, the product is assessed to be original.
Quantity Information
The hardware and accessories identified in the images are listed below.
- Main Device: 1 oxygen concentrator
- Humidifier Bottle: 1 unit
- Oxygen Tubing: 1 unit
- Power Cable: 1 unit
Physical Condition and State
The general condition of the device is used but good. No breaks, cracks, dents, or significant discoloration have been observed on the white plastic outer casing. It is noted that the transparent protective film on the control panel located on the upper part of the device has started to peel and is worn.
Mechanical and Electronic Components
On the front surface of the device, there is a mechanical flowmeter showing a range of 0 to 5 liters/minute (LPM) and an adjustment knob. A black, standard on/off (I/O) switch is present on the top panel. The device does not have any digital display. The grilles providing motor ventilation in the rear section are open, and there is no physical obstruction. Wheels are present on the bottom part of the device to facilitate transport.
Accessories and Connections
In the rear section of the device, there is a transparent plastic humidifier bottle secured to the casing with a black retaining strap. The black mains power cable is wrapped around the rear of the device. The transparent oxygen delivery tubing is attached to the device. Two protrusions designed for cable winding are located on the rear body.
Label Information
A gray manufacturer’s label is located on the lower rear part of the device. The data on the label cannot be fully read due to the clarity level of the image.
- Readable Expressions: OXYTIME, MADE IN TURKEY
- Unreadable Expressions: Serial number, lot number, REF code, and electrical technical values could not be identified as they are blurry in the image.
Potential Malfunction Risk
During the examination conducted through the images, no crushing, breakage, corrosion, or crack that could cause a malfunction was detected on the device’s casing, mechanical parts, or cables. In terms of external appearance, the device’s condition is good and it does not present any visible malfunction risk.
